VISOR 2843682 - Caterpillar

Illustration 38 g03389579
(A) Plate assembly (B) Plate assembly (C) Plate assembly (D) Plate assembly
Secure plate assembly (A), plate assembly (B), plate assembly (C), and plate assembly (D) with the same hardware that was removed in Step 1 of the ""Fabrication to the Drive Shaft Plate Assemblies"".
Illustration 39 g03385656
(A) Plate assembly (B) Plate assembly (C) Plate assembly (D) Plate assembly (1) 8T-4139 Bolt (2) 8T-4223 Hard Washer (3) 391-0614 Bracket As (4) 424-1900 Plate As
Secure two plate assemblies (4) and two bracket assemblies (3) by using 16 bolts (1) and 16 hard washers (2) .
Illustration 40 g03386073
View of the top of the drive shaft guard assemblies
Secure the two retained top plate assemblies by using the hardware that was retained from Step 1 of the ""Fabrication to the Drive Shaft Plate Assemblies"". Installation of the Transmission Guard Assembly
Illustration 41 g03386101
(1) 8T-4139 Bolt (2) 8T-4223 Hard Washer (3) 391-0614 Bracket As (5) 430-5981 Guard As
Secure bracket assembly (3) to guard assembly (5) by using four bolts (1) and four hard washers (2) .
Illustration 42 g03385662
(5) 430-5981 Guard As (6) 6V-6317 Bolt (7) 6V-5839 Washer
Illustration 43 g03386147
(5) 430-5981 Guard As (7) 6V-5839 Washer (8) 6V-4249 Bolt (9) 8T-4178 Bolt (10) 8T-4121 Hard Washer
Secure guard assembly (5) to the transmission by using three bolts (6), four washers (7), and one bolt (8) .Secure the transmission harness assembly with two bolts (9), two hard washers (10), and the hardware that was removed in Step 2 of the ""Removal Procedure"".Install the Transmission Hose Assembly
Illustration 44 g03386166
(2) 8T-4223 Hard Washer (10) 8T-4121 Hard Washer (11) 428-5396 Hose As (12) 8T-4182 Bolt (13) 133-6934 Spacer (14) 6D-4244 Clip (15) 5P-7464 Clip (16) 5P-7465 Clip (17) 6V-1249 Grommet (18) 8T-4183 Bolt (19) 8T-4137 Bolt (20) 8T-4136 Bolt (21) 8T-4133 Nut
Install hose assembly (11) and secure hose assembly (11) with the following hardware:
One hard washer (2)
Five hard washers (10)
Two bolts (12)
Two spacers (13)
Five clips (14)
One clip (15)
One clip (16)
One grommet (17)
One bolt (18)
One bolt (19)
One bolt (20)
One nut (21) Install the Handrail and Bracket Assemblies
Illustration 45 g03386161
Typical view of the handrail arrangement installed
For instructions on the installation of the handrail arrangement, refer to Special Instruction, REHS7990, "Procedure to Install the Working at Heights Attachment on the 793F Off-Highway Truck".