1341253 WARNING GP-BACKUP Caterpillar parts
527
Rating:
Alternative (cross code) number:
CA1341253
134-1253
1341253
CA1341253
134-1253
1341253
TRACK SKIDDER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$55.00
20 Aug 2022
14.0[6.30] Pounds
US: CyclesRUs
00 Polaris Xpedition 425 4x4 Front Differential
Polaris Genuine OEM Polaris Part || OEM Differential || Part Number: 1341253 || May not include original package.
Polaris Genuine OEM Polaris Part || OEM Differential || Part Number: 1341253 || May not include original package.
$50.00
03 Jun 2021
US: AMF INDUSTRIAL
New Electric Fan Motor for Chevrolet Corsa - 90469469 1314521 1341253 1341258
DTS 100% New aftermarket unit built to meet OEM specifications || NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality || 90469469
DTS 100% New aftermarket unit built to meet OEM specifications || NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality || 90469469
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 1341253:
Information:
the secondary filter installation.It will be the dealer choice as to which optional filter is installed on the test stand. Determine what type of filtering will be required most often, and install the appropriate type of filtering system. These filters can only be added to the 15 horsepower test stands.Secondary Filter
Nomenclature
Illustration 1. Nomenclature for Secondary Filter Installation. Refer to Chart A for item identification.Fabricated Parts
All the parts required for this installation can be ordered from Caterpillar Parts Distribution, except bracket (1). This must be manufactured by the bench owner, using the dimensions provided below.This bracket can be made from common SAE1018 steel. Weld the two pieces together.
Illustration 2. Filter Mounting Bracket. Refer to Chart B for dimensions.Installation
Assemble the Fuel Filter
1. Install 053-0088 Fitting (17) with 3J-1907 Seal (18) into the inlet port (left side) of the filter base. (This converts a number 6 STOP port to NPT). Install 5P-4455 Fitting (19) into fitting (17).2. Install 2R-6806 Fitting (15) with 3J-1907 Seal (16) into the outlet port (right side) of the filter base.3. Install 6N-4414 Cover (7) onto the filter base using 1P-0436 Gasket (8), 4B-3388/6V-2317 (9), and OS-1616/6V-8490 Bolt (10).4. Install 9S-4182 Plug (5) with 6V-5084 O-ring Seal (6) into the top of the filter base.5. Install the filter base assembly onto filter bracket (1), as shown in Illustration 1, using the two OS-0509 Bolts (4).Mount the Fuel Filter Assembly to the Test Stand
Mount the suction supply filter group and bracket assembly between the cooling fan and the fuel filter group, as shown in Illustration 1.1. Remove the two lower left-side panels from the test stand to access the calibration fluid tank, and the controls and connections area under the test stand.
Illustration 3. Remove Plug From Under Connector (22).2. Remove plug from the underside of connector (22), and install 6V-3523 Fitting (13) with 6V-0406 Dowty Seal (14). Refer to Illustration 3 for view of completed installation.
Illustration 4. Install Hose Assembly (12).
(13) Fitting. (14) Seal. (15) Fitting. (16) O-ring seal.3. Remove bolt (2, Illustration 1) from the top of the test stand manufacturer's oil filter/fuel filter bracket.4. Align the mounting hole in bracket (1) and install 8T-4908 Bolt (2) (not the bolt removed from this location).5. Install 8N-7140 Hose Assembly (12) as shown in Illustration 4.
Illustration 5. Route Suction Tubing Into Test Oil Tank.
(20) Tubing. (21) Nylon Wire Tie.6. Install tubing (20) (fuel suction line) between the calibration fluid tank and the inlet side of the new suction line fuel filter assembly, as shown in Illustration 5.
Illustration 6. Notch Bottom Of Suction Line. Install the suction line in the tank so the inlet of the tubing is always below the low level shutdown mark. Also cut two small notches, as shown in Illustration 6, in the end of the tubing to prevent the line from plugging.7. Secure tubing (20, Illustration 5) with a 068-9941 Nylon Wire Tie (21) or equivalent.8. Install side panels on test stand.9. Mark the port on top of the test stand "SUCTION SUPPLY", as shown
Nomenclature
Illustration 1. Nomenclature for Secondary Filter Installation. Refer to Chart A for item identification.Fabricated Parts
All the parts required for this installation can be ordered from Caterpillar Parts Distribution, except bracket (1). This must be manufactured by the bench owner, using the dimensions provided below.This bracket can be made from common SAE1018 steel. Weld the two pieces together.
Illustration 2. Filter Mounting Bracket. Refer to Chart B for dimensions.Installation
Assemble the Fuel Filter
1. Install 053-0088 Fitting (17) with 3J-1907 Seal (18) into the inlet port (left side) of the filter base. (This converts a number 6 STOP port to NPT). Install 5P-4455 Fitting (19) into fitting (17).2. Install 2R-6806 Fitting (15) with 3J-1907 Seal (16) into the outlet port (right side) of the filter base.3. Install 6N-4414 Cover (7) onto the filter base using 1P-0436 Gasket (8), 4B-3388/6V-2317 (9), and OS-1616/6V-8490 Bolt (10).4. Install 9S-4182 Plug (5) with 6V-5084 O-ring Seal (6) into the top of the filter base.5. Install the filter base assembly onto filter bracket (1), as shown in Illustration 1, using the two OS-0509 Bolts (4).Mount the Fuel Filter Assembly to the Test Stand
Mount the suction supply filter group and bracket assembly between the cooling fan and the fuel filter group, as shown in Illustration 1.1. Remove the two lower left-side panels from the test stand to access the calibration fluid tank, and the controls and connections area under the test stand.
Illustration 3. Remove Plug From Under Connector (22).2. Remove plug from the underside of connector (22), and install 6V-3523 Fitting (13) with 6V-0406 Dowty Seal (14). Refer to Illustration 3 for view of completed installation.
Illustration 4. Install Hose Assembly (12).
(13) Fitting. (14) Seal. (15) Fitting. (16) O-ring seal.3. Remove bolt (2, Illustration 1) from the top of the test stand manufacturer's oil filter/fuel filter bracket.4. Align the mounting hole in bracket (1) and install 8T-4908 Bolt (2) (not the bolt removed from this location).5. Install 8N-7140 Hose Assembly (12) as shown in Illustration 4.
Illustration 5. Route Suction Tubing Into Test Oil Tank.
(20) Tubing. (21) Nylon Wire Tie.6. Install tubing (20) (fuel suction line) between the calibration fluid tank and the inlet side of the new suction line fuel filter assembly, as shown in Illustration 5.
Illustration 6. Notch Bottom Of Suction Line. Install the suction line in the tank so the inlet of the tubing is always below the low level shutdown mark. Also cut two small notches, as shown in Illustration 6, in the end of the tubing to prevent the line from plugging.7. Secure tubing (20, Illustration 5) with a 068-9941 Nylon Wire Tie (21) or equivalent.8. Install side panels on test stand.9. Mark the port on top of the test stand "SUCTION SUPPLY", as shown
Caterpillar SIS machinery equipment:
Caterpillar SIS
527 Track Skidder J6800001-UP (MACHINE) POWERED BY C7.1 Engine »
134-1253
WARNING GP-BACKUP
527 TRACK-TYPE SKIDDER 2RS00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP
527 TRACK-TYPE SKIDDER 2RS00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP
527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP
527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP
527 TRACK-TYPE SKIDDER Grapple 4NS00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP
527 TRACK-TYPE SKIDDER Grapple 4NS00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP
527 Track Skidder JSR00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP
527 Track Skidder JSR00001-UP (MACHINE) POWERED BY 3304 Engine »
134-1253
WARNING GP-BACKUP