AVSPARE.COM
parts catalog

WASHER 0005574 - Caterpillar



0005574 WASHER Caterpillar parts WASHER
Rating:
81
Alternative (cross code) number:
CA0005574
000-5574
0005574
Caterpillar 0005574 WASHER
Weight: 2 pounds 1 kg.

Buy WASHER 0005574 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-8223     Lifting Sling     2    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Check the condition of the radiator prior to the installation. Remove any dirt or debris that may restrict the flow of air through the core. If any of the cooling fins are bent, the fins should be straightened.
Illustration 1 g01048394
Fasten Tooling (A) and a suitable lifting device to the radiator guard, the radiator, and the oil cooler (13) .Note: Do not damage the radiator core when the radiator is installed into the machine.
Carefully install the radiator guard, the radiator, and the oil cooler into the machine. The combined weight of the radiator guard, the radiator, and the oil cooler (13) is approximately 186 kg (410 lb).
Illustration 2 g00833287
Install rubber pads (16), retainers (15), and bolts (14) that hold the radiator in place.
Remove Tooling (A) from the radiator guard, the radiator, and the oil cooler (13) .
Illustration 3 g00833286
Install access panels (12) and bolts (11) onto the machine.
Illustration 4 g00833285
Install bolts (10) .
Illustration 5 g00833284
Install harness assembly (8) in the radiator guard and connect the harness assembly to the horn. Use cable straps to secure harness assembly (8) for horn (9) in place.
Illustration 6 g00833283
Install front grill (7) and bolts (6) onto the radiator guard.
Illustration 7 g00833282
Connect hose assemblies (5) to the hydraulic oil cooler.
Illustration 8 g01047371
Install the oil filler tube and bolts (2) on the machine. Tighten the hose clamp that is on oil filler tube (3) .
Install the radiator top hose on the machine. Tighten both of the hose clamps on radiator top hose (1) .
Install the radiator bottom hose on the machine. Tighten both of the hose clamps on lower radiator hose (4) .
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual for the correct filling procedure.End By:
Install the fan and the fan guard. Refer to Disassembly and Assembly, "Fan and Fan Guard - Remove and Install" in this manual.
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".


Parts washer Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.