WASHER 0641156 - Caterpillar

Accumulated grease and oil on a machine is a fire hazard.Remove debris with steam cleaning or high pressure water, at the specified interval in the Maintenance Interval Schedule or each time any significant quantity of oil is spilled on the machine.
Note: Watch closely for leaks. If a leak is observed, find the source of the leak and correct the leak. If a leak is suspected or observed, check the fluid levels more frequently.
Illustration 1 g00123006
Inspect the cylinders and the linkages for damage or for excessive wear. Repair any damages.
Inspect the lights for broken bulbs and for broken lenses. Replace any broken bulbs and any broken lenses.
Remove any trash buildup around the engine. Remove any trash buildup that is under the floorplate. Also, remove any dirt buildup that is on the top of the crankcase guard.
Inspect the cooling system for leaks and repair any cooling system leaks. Check the hoses, the radiator fins, the radiator cap, and the drain area.
Inspect the precleaner screen for any dirt buildup and for debris buildup. Remove any dirt and debris.
Inspect the engine compartment for leaks and repair any engine compartment leaks. Check around all seals and around all covers.
Inspect the condition of the steps and of the handholds. Inspect the steps and the handholds for cleanliness. If necessary, repair the steps or clean the steps.
Illustration 2 g00123008
Inspect the hydraulic system for leaks. Inspect the hoses, the seals, and the flanges. Repair any hydraulic system leaks.
Inspect the final drive for leaks. Repair any final drive leaks.
Illustration 3 g00123450
Make sure that the covers and the guards are secured. Inspect the covers and the guards for damage, for loose bolts, and for missing bolts.
Inspect the transmission for leaks. Check around the seals and around the covers. Also, check the hoses around the transmission. Repair any leaks.
Illustration 4 g00123452
Inspect the tracks. Repair the tracks if the tracks are damaged or excessively worn. Tighten any loose bolts. Replace missing bolts. Check the tracks for excessive dirt buildup. Check the tightness of the track. Refer to Operation and Maintenance Manual, "Tracks".
Inspect the guiding guards for the track. Check for loose bolts or for missing bolts. Check the track components for damage and for wear.
Inspect the operator compartment for cleanliness. Remove any trash buildup and any dirt buildup.
Inspect the instrument panel. Repair any broken gauge or lights.
Illustration 5 g00123453
Make sure that the horn, the backup alarm, the lights, the guards, and the shield are working properly.Inspect the Hook and the Wire Cable
Inspect the Hook
Inspect the hook frequently. The inspections should include observation of the hook during operation. A designated person determines if the conditions that are found during the inspections constitute a hazard. The designated person will determine if a more detailed inspection is required.
Inspect the hook for any distortion such as bends in the hook or twists in the hook.
Inspect the hook for any wear.
Inspect the hook for cracks, nicks, or gouges.
If a latch is provided, inspect the latch. Make sure