WASHER 0783487 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-7615     Pin     2    
4C-6486 Stand     2    
8S-7641 Tube     2    
8S-8048 Saddle     2    
B     1U-7505     Hydraulic Jack     1    
Illustration 1 g01378666
Secure rear axle assembly (20) to Tooling (B) with suitable chains. The weight of rear axle assembly (20) is approximately 500 kg (1102 lb). Install rear axle assembly (20) and bolts (19) .
Illustration 2 g01378665
Install tube assembly (16). Slide hose assembly (17) through the frame of the machine and connect hose assembly (17). Install plate (13). Install nuts (14) and bolts (15).
Illustration 3 g01378664
Remove bolts (11) and cover (12) .
Repeat Steps 2 through 3 for the other side.
Illustration 4 g01378662
Connect hose assembly (10) to the front side of the rear axle.
Illustration 5 g01378661
Connect rear drive shaft (8) and install bolts (9) .
Illustration 6 g01260073
Connect parking brake cable assembly (7) .
Illustration 7 g01260083
Illustration 8 g01260065
Attach a suitable lifting device to the rear tire and rim (6). The weight of the rear tire and rim (6) is approximately 276 kg (608 lb). Install the rear tire and rim (6). Install lug nuts (1) .
Raise the rear of the machine. Remove Tooling (A). Lower the machine onto the ground. Tighten lug nuts (1) to a torque of 500 50 N m (368 36 lb ft).
Illustration 9 g01260075
Illustration 10 g01260076
Install fender (3) and bolts (4). Install bolts (2) to rear fender (3). Install filter (5) .