WASHER-SPRING 0815284 - Caterpillar

Left Side Mirror
Illustration 1 g00767361
Before you transport the machine, remove the left side mirror. After you transport the machine, reinstall the mirror by using the following procedure:
Illustration 2 g00472168
(2) Mirror (3) Bolt (4) Washer (5) Bracket (6) Bar (7) Nut
Use two bolts (3) and two washers (4) to install bracket (5) to bar (6) .
Attach mirror (2) to bar (6) by tightening nut (7) .
Rotate the mirror to the desired angle.Note: Refer to Operation and Maintenance Manual, "Mirror" for more information that pertains to adjusting the mirror.Right Side Mirror
Note: Before you transport the machine, remove the rearview mirror or reposition the rearview mirror inward.After you transport the machine, reinstall the rearview mirror or return the rearview mirror to the proper position. Use the following procedure.
Illustration 3 g00581776
(1) Bracket (2) Bolts (3) Washers
Use four bolts (2) and four washers (3) to install bracket (1) on the right side of the storage box.
Illustration 4 g00581777
(1) Bracket (2) Bolts (3) Washers (4) Holder (5) Mirror (6) Bolts (7) Washers (8) Washers
Install holder (4) into bracket (1) with two bolts (2) and two washers (3).
Position mirror (5) in holder (4) with bolts (6) and washers (7). Use the necessary amount of washers (8) as a spacer between holder (4) and mirror (5) .
Illustration 5 g00581778
To adjust the angle of the mirror, loosen bolts (6). Rotate the mirror by hand to the desired angle. Tighten the bolts securely.