WASHER 1015984 - Caterpillar

Illustration 1 g02610756
Monitor display
Arrow button (1) - The arrow button is used to perform the following functions:
Toggle the display between the camera views (front, rear, left, and right)
Highlight a selection (up/down and left/right)
Manually adjust brightness level after the brightness button is depressed (right/ left)
Camera selection
OK button (2) - The "OK" button is used to select items that are highlighted.
Tab button (3) - The tab button is used to change the active screen between the plan view and the camera view.
Brightness button (4) - The brightness button is used to adjust the screen brightness. The screen will toggle between two settings. Press the button once to set the screen to the brightest mode, press the button again to set the screen to dimmest mode. Pressing and holding the brightness button for 3 seconds will cause the brightness adjustment window to appear.
Alarm acknowledge button (5) - The alarm acknowledge button is used for acknowledging alarms. Press the button once to acknowledge the alarm. If a new alarm occurs, the new alarm must be acknowledged again. Additionally, the alarm acknowledge can be used to mute the alarm until the next power cycle or when the button is held again for 3 seconds. When the alarm is muted, all alarms will still be displayed but not be audible. The mute feature depends upon site configuration.