WASHER-BACKUP 1135485 - Caterpillar

Table 3
Pump Flow Test    
Machine Serial Number KGG1-UP    
   Measuring Points    
13700 kPa (1975 psi)
17700 kPa (2550 psi)    
19600 kPa (2850 psi)    
25500 kPa (3700 psi)    
29400 kPa (4250 psi)    
Flow measured liter/min (US gpm)     Drive Pump                        
Idler Pump                    
Oil temperature °C (°F)                        
               
Engine speed (rpm)                        
               
Flow corrected liter/min (US gpm)     Drive Pump                        
Idler Pump                    
Specification for flow rate liter/min (US gpm)     Machines with High Ambient Temperature Cooling Arrangement     New Machine    
225 10 (59.4383 2.6)    
210 10 (55.4757 2.6)    
195 10 (51.5132 2.6)    
145 10 (38.3047 2.6)    
123 10 (32.4929 2.6)    
Service limit
210 (55.5)    
175 (46.2)    
162 (42.8)    
109 (28.8)    
92 (24.3)    
Machines with High Ambient Temperature Cooling Arrangement and a Third Pump New Machine    
225 10 (59.4 2.6)    
196 10 (51.8 2.6)    
184 10 (48.6 2.6)    
136 10 (35.9 2.6)    
115 10 (30.4 2.6)    
Service limit
210 (55.5)    
163 (43.1)    
154 (40.7)    
102 (26.9)    
87 (23.0)    Note: Specifications for output flow rates are based on an engine speed of 1800 rpm. To attain more accurate test results, measured flow should be corrected with the following calculation.
Table 4
Corrected flow     =     Measured flow x 1800 rpm    
Measured rpm Note: Specifications for output flow rates are based on a power shift pressure at the pump of 2400 50 kPa (350 7 psi). The output flow rate changes approximately 7 L/min (1.8 US gpm) for each 100 kPa (14 psi) of power shift pressure in the lower range of the constant horsepower control. The output flow rate changes approximately 3 L/min (0.8 US gpm) for each 100 kPa (14 psi) of power shift pressure in the higher range of the constant horsepower control.Note: Flow measurements must be done only during pressure rise.