WASHER 1238643 - Caterpillar

* Partial machines, power trains, etc., soldthrough Caterpillar OEM Solutions Group. (Reference Warranty Bulletin No.2.10)PARTS NEEDED
Qty
Part Number Description
2 2M9780 SEAL-O-RING
2 5P8196 PLUG-O-RINGACTION REQUIRED
See the attached Rework Procedure.OWNER NOTIFICATION
U.S. and Canadian owners will receive the attachedOwner Notification.SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs.
100% 1.0 0 0 0 0
This is a 1.0-hour job. U.S. and Canadian Dealers Only - Eligibledealers may enter a Type 2 SIMS ReportPARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.MAKE EVERY EFFORT TO COMPLETE THIS PROGRAMAS SOON AS POSSIBLE.Attach. (1-Owner Notification)
(2-Rework Procedure)COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999PRIORITY - PRODUCT IMPROVEMENT PROGRAM FORREPLACING PLUGSMODELS INVOLVED - CERTAIN 3116, 3126, AND 3126BENGINES; 322C, 325C, 325C L MEDIUM EXCAVATORS; 938G, 950G II, 962G II MEDIUMWHEEL LOADERS, 953C AND 963C TRACK LOADERS, D5N LGP, D5N XL, D6N LGP, D6N-XL,D6N XL DS TRACK TYPE TRACTORS, AND CS-531D, CS-531D, CS-533C, CP-533D VIBRATORYSOIL COMPACTORSDear Caterpillar Product Owner:New plugs need to be installed on the productslisted below. Some 3116, 3126, and 3126B engines have been assembled with9S4190 plugs instead of 5P8196 plugs of the oil filter bypass system. Theinstallation of the wrong plug decreases the bypass valve pressure allowingthe passage of unfiltered oil into the engine lubricant circuit. You willnot be charged for the service performed.Contact your local Caterpillar dealer immediatelyto schedule this service. The dealer will advise you of the time requiredto complete this service. Please refer the dealer to their Service Letterdated March 9, 2004 when scheduling this service.We regret the inconvenience this may causeyou, but urge you to have this service performed as soon as possible toprevent unscheduled downtime.Caterpillar Inc.
Identification #(s)Attached to March 9, 2004 Service LetterRework ProcedureA) For Commercial Engine
Replace the 9S4190 Plugs with the 5P8196 Plugson the engine oil filter base at locations (1) and (2) torque to 57+5 Nm(42+4 lb ft). Replace both Old 2M9780 Seals by New One.
Illustration 1 (3100 Engines)B) For Captive Engines
Remove both 9S4190 Plugs and 2M9780 Seals.
Install the 2M9780 Seals, the 5P8196 Plugs, andtorque to 57 + 5 Nm (42 + 4 lb ft).
Illustration 2 (Excavator machines 325C (remoteoil base)