WASHER 1528851 - Caterpillar

Table 3
Sales Model     Serial Number    
950H     S/N:K5K1-1063    
950H     S/N:N1A1-1017    
950H     S/N:M1G1-554    
962H     S/N:N4A1-404    
962H     S/N:K6K1-250    
962H     S/N:M3G1-232    
IT62H     S/N:M5G1-253    
Table 4
Sales Model     Serial Number    
950H     S/N:K5K1064-UP    
950H     S/N:N1A1018-UP    
950H     S/N:M1G555-UP    
962H     S/N:N4A405-UP    
962H     S/N:K6K251-UP    
962H     S/N:M3G233-UP    
IT62H     S/N:M5G254-UP    
Illustration 1 g01361625
New design for remote mounted breather (1) 9G-5127 Breather As (2) 5H-8936 Adapter (3) 169-7395 Adapter As (4) 8T-4123 Washer (5) 6V-9169 Bulkhead Nut (6) 126-7411 Hose As (7) 165-4925 Elbow As
Illustration 2 g01371218
New design for remote mounted breather (View from top right side) (1) 9G-5127 Breather As (8) 298-5624 Bracket Rework Procedure
Illustration 3 g01371230
5 mm (0.20 inch) thick plate for fabrication (A) 50 2 mm (1.9685 0.079 inch) (B) 25 2 mm (0.984 0.079 inch) (C) 14 mm (0.551 inch) diameter (D) 22 mm (0.866 inch) diameter (E) 15 3 mm (0.591 0.118 inch) radius for four corners (F) 15.5 1.5 mm (0.610 0.059 inch) (G) 104.5 1.5 mm (4.114 0.059 inch) (H) 145 3 mm (5.709 0.118 inch)
Fabricate the plate as the plate is shown in Illustration 3.
Illustration 4 g01371227
Top view of machine
Remove 8T-4139 Bolt (1) .
Add the new fabricated plate under the 246-4777 Bracket (9). Position the fabricated plate toward the center of the machine. Rotate to a 15 degree angle toward the rear of the machine.
Replace 8T-4139 Bolt with 8T-4956 Bolt .
Remove 4F-0186 Pipe Nipple and 9C-4937 Breather As .
Install the parts for the new remote mounted breather. Reference Table 2 for the required parts.
Assemble 165-4925 Elbow Gp onto the transmission case and the 126-7411 Hose As .