WASHER 1582860 - Caterpillar

1582860 WASHER Caterpillar parts 836G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1582860
158-2860
1582860

Information:

ID 18 mm

MATERIAL Steel Rc C36-42

MATL THK 6 mm

OD 82.6 mm

Buy WASHER 1582860 Caterpillar genuine, new aftermarket tractor parts with delivery
LANDFILL COMPACTOR,

Compatible equipment models: 1582860:

LANDFILL COMPACTOR 836G Caterpillar

Number on catalog scheme: 12

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist Gp 1
386-6031(1) Lever Puller Hoist Gp
B 395-1592 Lifting Eye Assembly 2
C 439-3940 Bracket As 1
(1) This part number complies with European requirements.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Recover the refrigerant. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating R134a for All Caterpillar Machines" for the recovery and the charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.
Illustration 1 g03863204
Disconnect harness assemblies (1) and (2).
Illustration 2 g03863267
Remove bolt (5) and disconnect hose assemblies (3) and (4).
Illustration 3 g03863332
Remove bolt (6). Position the hose assemblies out of the way.
Illustration 4 g03863362
Attach Tooling (B) and Tooling (C) to ROPS (7). Attach Tooling (A) to Tooling (C).
Attach a suitable lifting device to Tooling (A) and Tooling (B). The weight of ROPS (7) is approximately 300 kg (660 lb).
Illustration 5 g03863369
Remove bolts (8). Remove ROPS (7). Installation Procedure
Install ROPS (7) in the reverse order of removal.