1641344 WASHER-THRUST Caterpillar parts
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424B, 424B HD, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432...
Rating:
Alternative (cross code) number:
CA1641344
164-1344
1641344
CA1641344
164-1344
1641344
Weight: 0.01 pounds 0 kg.
Information:
ID
13.6
mm
MATERIAL
Nylon
MATL THK
2.1
mm
OD
30
mm
BACKHOE LOADER, SKID STEER LOADER,
Compatible equipment models: 1641344:
Information:
Remove & Install Radiator & Radiator Guard (Prime)
FLUID SPILLAGE CONTAINMENTCare must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "Tools And Shop Product Guide", NENG2500, for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates.1. Drain the coolant from the radiator into a suitable container for storage or disposal. 2. Loosen hose clamps (4) and (5). Disconnect tube (1) from hose (6). Rotate tube (1) 180 degreesfor clearance. Remove bolts (2) from support arms (3). 3. Remove eight bolts (7) holding fan guard (8) to the radiator guard. 4. Install Tool (A) and a hoist to the radiator. 5. Remove four bolts (10) that fasten the lower radiator elbow to the radiator. Separate the elbow from the radiator. Remove bolt (11) from the crankcase vent hose clamp.Remove four mounting bolts (9). Remove the radiator and radiator guard. The weight of the radiator and radiator guard is 250 Kg (550 lb). The following steps are for the installation of the radiator and radiator guard.6. Use a hoist to put the radiator and radiator guard in position on the base. Install four mounting bolts (9). Remove the hoist and Tool (A).7. Install the gasket and lower radiator elbow (12) to the radiator. Install bolts (10). Install bolt (11) and the clamp to hold the crankcase vent hose in place.8. Install bolts (7) to hold fan guard (8) in position.9. Connect tube (1) to hose (6) and tighten hose clamps (4) and (5). Install bolts (2) to secure control arms (3) to the radiator guard.10. Fill the radiator with coolant to the correct level. See the Operation & Maintenance Manual.Disassemble & Assemble Radiator
Start By:a. remove radiator and radiator guard**The radiator can be disassembled and assembled without removing the radiator and guard. FLUID SPILLAGE CONTAINMENTCare must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "Tools And Shop Product Guide", NENG2500, for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. Remove eighteen bolts (2) and remove four plates (4). Remove four bolts, block off plate (1) and the gasket. Remove four bolts, upper radiator hose adapter (3) and the gasket. 2. Loosen four bolts (7). Disconnect tube assemblies (5) and (8). Remove four bolts (9) and remove coolant level switch if applicable. 3. Remove eleven bolts (11) and remove overflow tube (10), crankcase vent tube clamp (13) and radiator grill (12). 4. Fasten Tool (A) and a hoist to top tank (14). Remove the twelve remaining bolts holding the top tank to the
FLUID SPILLAGE CONTAINMENTCare must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "Tools And Shop Product Guide", NENG2500, for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates.1. Drain the coolant from the radiator into a suitable container for storage or disposal. 2. Loosen hose clamps (4) and (5). Disconnect tube (1) from hose (6). Rotate tube (1) 180 degreesfor clearance. Remove bolts (2) from support arms (3). 3. Remove eight bolts (7) holding fan guard (8) to the radiator guard. 4. Install Tool (A) and a hoist to the radiator. 5. Remove four bolts (10) that fasten the lower radiator elbow to the radiator. Separate the elbow from the radiator. Remove bolt (11) from the crankcase vent hose clamp.Remove four mounting bolts (9). Remove the radiator and radiator guard. The weight of the radiator and radiator guard is 250 Kg (550 lb). The following steps are for the installation of the radiator and radiator guard.6. Use a hoist to put the radiator and radiator guard in position on the base. Install four mounting bolts (9). Remove the hoist and Tool (A).7. Install the gasket and lower radiator elbow (12) to the radiator. Install bolts (10). Install bolt (11) and the clamp to hold the crankcase vent hose in place.8. Install bolts (7) to hold fan guard (8) in position.9. Connect tube (1) to hose (6) and tighten hose clamps (4) and (5). Install bolts (2) to secure control arms (3) to the radiator guard.10. Fill the radiator with coolant to the correct level. See the Operation & Maintenance Manual.Disassemble & Assemble Radiator
Start By:a. remove radiator and radiator guard**The radiator can be disassembled and assembled without removing the radiator and guard. FLUID SPILLAGE CONTAINMENTCare must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "Tools And Shop Product Guide", NENG2500, for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. Remove eighteen bolts (2) and remove four plates (4). Remove four bolts, block off plate (1) and the gasket. Remove four bolts, upper radiator hose adapter (3) and the gasket. 2. Loosen four bolts (7). Disconnect tube assemblies (5) and (8). Remove four bolts (9) and remove coolant level switch if applicable. 3. Remove eleven bolts (11) and remove overflow tube (10), crankcase vent tube clamp (13) and radiator grill (12). 4. Fasten Tool (A) and a hoist to top tank (14). Remove the twelve remaining bolts holding the top tank to the
Cat SIS web machinery list:
Parts washer Caterpillar catalog:
4B4283
WASHER
118, 119, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H, 14H NA, 16, 160H, 1...
118, 119, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H, 14H NA, 16, 160H, 1...
8T1482
WASHER-HARD
1090, 1190, 1190T, 120K, 120K 2, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L...
1090, 1190, 1190T, 120K, 120K 2, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L...
1146658
WASHER
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 24...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 24...
7X0521
WASHER-HARD
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140K, 140K 2, 160K, 235, 235B, 236D, 242D, 246D, 257D, 259D, 262D, 267B, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 3114, 3116, 3...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140K, 140K 2, 160K, 235, 235B, 236D, 242D, 246D, 257D, 259D, 262D, 267B, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 3114, 3116, 3...
8F7242
WASHER
120, 120B, 12E, 12F, 14E, 14M, 16, 1673, 1673B, 16G, 16M, 216B3, 225, 226B3, 236B3, 236D, 242B3, 242D, 245, 246C, 246D, 247B3, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 272C, 272D, 272...
120, 120B, 12E, 12F, 14E, 14M, 16, 1673, 1673B, 16G, 16M, 216B3, 225, 226B3, 236B3, 236D, 242B3, 242D, 245, 246C, 246D, 247B3, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 272C, 272D, 272...
1541580
WASHER-HARD
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP, 3512C, 3516, 3516B, 3516C, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F...
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP, 3512C, 3516, 3516B, 3516C, 416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F...
1106501
WASHER-HARD
12H, 12H NA, 140H, 140H NA, 330B L, 330C, 330C L, 330D L, 336D L, 336E HVG, 365B, 365C L, 385B, 385C L, 414E, 5080, 527, 583T, 587R, 587T, D5H, D5H XL, D5HTSK II, D6M, D6N
12H, 12H NA, 140H, 140H NA, 330B L, 330C, 330C L, 330D L, 336D L, 336E HVG, 365B, 365C L, 385B, 385C L, 414E, 5080, 527, 583T, 587R, 587T, D5H, D5H XL, D5HTSK II, D6M, D6N
1984780
WASHER-HARD
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14M, 160H, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16M...
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14M, 160H, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16M...
2229151
WASHER-HARD
120M, 120M 2, 12M, 12M 2, 12M 3, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24M, 320E, 320E L, 320E LN, 323E L, 328D LCR, 330D, 330D FM, 330D L, 330D MH, 336D, 336D ...
120M, 120M 2, 12M, 12M 2, 12M 3, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24M, 320E, 320E L, 320E LN, 323E L, 328D LCR, 330D, 330D FM, 330D L, 330D MH, 336D, 336D ...
1641343
WASHER-THRUST
414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424B, 424B HD, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446D, 450E, 450F
414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424B, 424B HD, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446D, 450E, 450F
1860817
WASHER-HARD
416D, 420D, 420E, 424D, 428D, 430D, 432D, 438D, 442D, 446D, 554, 564, 574, 574B, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, 972K, 980K...
416D, 420D, 420E, 424D, 428D, 430D, 432D, 438D, 442D, 446D, 554, 564, 574, 574B, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, 972K, 980K...
9X1481
WASHER
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B, 272C, 297C, 299C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 44...
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B, 272C, 297C, 299C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 44...
1976658
WASHER
416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D, 446D, C3.3, C4.4, SPF343C, TH48-E80
416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D, 446D, C3.3, C4.4, SPF343C, TH48-E80
1957055
WASHER-HARD
246C, 256C, 262C, 262C2, 272C, 272D, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434...
246C, 256C, 262C, 262C2, 272C, 272D, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434...
4B5271
WASHER
120B, 120G, 127, 128, 12E, 12F, 12G, 12H, 130G, 140, 140B, 140G, 140H, 141, 14E, 14G, 16, 163, 1673, 1673B, 1674, 1676, 16G, 16H NA, 172, 183, 183B, 184, 191, 227, 235C, 24, 245, 3304, 3306, 3406, 340...
120B, 120G, 127, 128, 12E, 12F, 12G, 12H, 130G, 140, 140B, 140G, 140H, 141, 14E, 14G, 16, 163, 1673, 1673B, 1674, 1676, 16G, 16H NA, 172, 183, 183B, 184, 191, 227, 235C, 24, 245, 3304, 3306, 3406, 340...
7X0550
WASHER-HARD
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
1045507
WASHER
430D
430D
1985989
WASHER-HARD
420D, 424D, 430D, 432D, 442D, 966H, 966K, 966M, 972H, 972K, 972M
420D, 424D, 430D, 432D, 442D, 966H, 966K, 966M, 972H, 972K, 972M
1985990
WASHER-CONICAL
420D, 430D
420D, 430D
3S1349
WASHER-HARD
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140M, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 160M, 163H, 163H NA, ...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140M, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 160M, 163H, 163H NA, ...
5W6411
WASHER
206, 420D, 428D, 430D, 432D, 438D, 442D, 446D
206, 420D, 428D, 430D, 432D, 438D, 442D, 446D