WASHER 1719440 - Caterpillar

There may be several specific warning signs on your engine. The exact location and a description of the warning signs are reviewed in this section. Please become familiar with all warning signs.Ensure that all of the warning signs are legible. Clean the warning signs or replace the warning signs if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the warning signs. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the warning signs. The warning signs that are loosened could drop off of the engine.Replace any warning sign that is damaged or missing. If a warning sign is attached to a part of the engine that is replaced, install a new warning sign on the replacement part. Your Caterpillar dealer can provide new warning signs.
Illustration 1 g02112825
(1) Universal warning (2) Warning label for a shock hazard(1) Universal Warning
Illustration 2 g01370904
A safety message may be located on each side of the valve cover base.
Do not operate or work on this engine or generator set unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals.Failure to follow the warnings and instructions could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
(2) Unit Injectors
Illustration 3 g01213287
A safety message is located on each side of the valve cover base.
Electrical shock hazard. The electronic unit injector system uses 90-120 volts.
This engine uses high voltage to the unit injectors. Disconnect the unit injector enable circuit connector in order to prevent personal injury. Do not come into contact with the unit injector terminals while the engine is operating.