WASHER-THRUST 2430917 - Caterpillar

Illustration 1 g02562836
Table 1
Specification for 361-5607 Water Pump Gp and 332-0984 Water Pump Gp
Item Qty Part Specification Description
1 1 6V-7350 O-Ring Seal Lubricate the bore lightly with 5P-3975 Rubber Lubricant before assembly.
2 - - Lubricate the top oil passage with 15 mL (0.5 oz) of engine oil.
Illustration 2 g02562917
Table 2
Specification for 361-5607 Water Pump Gp and 332-0984 Water Pump Gp
Item Qty Part Specification Description
3 1 225-7003 O-Ring Seal Lubricate the bore lightly with 5P-3975 Rubber Lubricant before assembly.
4 1 8C-3100 Lip Type Seal Do not lubricate.
Illustration 3 g02562897
Table 3
Specification for 361-5607 Water Pump Gp and 332-0984 Water Pump Gp
Item Qty Part Specification Description
C - - Distance between end of the pump housing to water pump shaft is 8.40 0.25 mm (0.331 0.010 inch).
E - - Distance from pump housing to water pump seal is 10.92 0.13 mm (0.430 0.005 inch).
5 1 203-3831 Cup Plug Maximum installation depth of the cup plug is 1.25 mm (0.049 inch).
Orient the cup plug weep hole at 10 degrees from vertical, as shown in Illustration 3.