WASHER-THRUST 2861967 - Caterpillar

Illustration 1 g03681717
(1) Apply Loctite 263 to the threads prior to installation. Torque for the two bolts ... 240 40 N m (175 30 lb ft) (2) Pack grease into 1/3 of the cavity in order to lubricate the lip of the seal. Use Cat Advanced 3 Moly Grease (3) 159-1073 Carrier (4) Lubricate both ends of the splines with grease on installation. (5) 184-4221 Flange (6) 146-2985 Lock Plate (7) Torque for the three bolts ... 240 20 N m (175 15 lb ft) (8) Torque for the nine bolts ... 240 20 N m (175 15 lb ft)Note: Before setting the torque for nine bolts (8), back off flange (5). Ensure that there is full contact between carrier (3) and the rear face of the hitch assembly. Torque bolts (8). Adjust the flange until all end-play has been removed. Install lock plate (6) and three bolts (7).