WASHER-SPECIAL 3016950 - Caterpillar

Torque for all 1/2 in. locknuts (jam nuts) that hold the rod ends in place on the rod ... 45 7 N m (33 5 lb ft) All rod assembly measurements must be made in a straight line between the centerlines of the rod end mounting holes.(B) Assembled length of rod assembly ... 410.0 1.5 mm (16.14 .06 in)(C) Assembled length of rod assembly ... 935 mm (36.8 in)(1) Torque for 14 bolts ... 47 4 N m (35 3 lb ft)(2) Torque for bolt ... 135 20 N m (100 15 lb ft)(3) Torque for bolts ... 45 7 N m (33 5 lb ft) Brake Pedal Linkage Adjustment Procedure1. Install adjusted rod assemblies (B) and (C).2. Adjust head end of bolt (6) away from support until spring (4) has extended (stretched) 3 1 mm (.12 .04 in). Bolt (6) is upper stop for brake pedal.3. Hold brake pedal against upper stop and push brake spool all the way into valve. Then adjust rod end so that the pin that connects rod end to valve spool has a free fit.4. Push brake pedal down until valve spool stops.5. Adjust bolt (5) until head contacts brake pedal.6. Release brake pedal and turn bolt (5) an additional 1/2 turn out. Tighten locknut.