3099443 WASHER GP-WINDOW Caterpillar parts
420E
Rating:
Alternative (cross code) number:
CA3099443
309-9443
3099443
CA3099443
309-9443
3099443
BACKHOE LOADER,
Compatible equipment models: 3099443:
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
Brake Controls
Do not apply the parking/emergency brake while the machine is moving. unless an emergency exists. The use of the parking brake as a service brake in regular operation will cause severe damage to the parking brake system.
Parking/Emergency Brake (1.) - Pull the knob up to apply the brake. When the brake is applied, the transmission is in NEUTRAL.Push the knob down to release the brake.Release the brake before moving the machine. Transmission Control Lock (2.) - Engaged (pushed in) - The transmission control is locked in NEUTRAL. Released (pulled out) - The transmission control lever can be moved to the FORWARD or REVERSE position. 1. Left Brake Pedal - The left brake pedal disengages the transmission and brakes the machine. This permits higher engine speed for better hydraulic response.Depress the left brake pedal when positioning and raising the bucket at the same time.Release the pedal to re-engage the transmission and to release the brake. 2. Right Brake Pedal - The right brake pedal slows down the machine ground speed for normal braking. Depress the right brake pedal for normal machine braking. Release the pedal to release the brake.Accelerator Pedal
Accelerator (3.) - Depress to increase the engine speed. Release to decrease the engine speed.The accelerator pedal can be used to shut off the engine by pulling the pedal back past the detent.Transmission Control Lever
Apply the service brake before moving the transmission control lever.
Direction Selector
Forward (1.) - Push the transmission lever forward. The machine will move forward. Neutral (2.) - The machine should not move when lever is in neutral. Reverse (3.) - Pull the transmission lever towards the operator. The machine will move in reverse.Speed Selector
Rotate the transmission control lever to the desired gear speed:1 - First Speed2 - Second Speed3 - Third Speed4 - Fourth SpeedSteering Column Tilting
Lift the latch to RELEASE the steering column. Move the column to the desired position. Release the latch to LOCK the steering column.Machine Warning Horn
Horn Button - Depress the horn button to sound the horn. The horn is used to warn or signal personnel.Electrical Power Supply
Disconnect Switch - Insert the key, and turn it to the right, to turn ON the electrical system. Turn the key to the left to turn OFF the electrical system.Remove the key when leaving the machine. Also, remove it when servicing the electrical system.
Never turn the disconnect key off with the engine running.
Do not apply the parking/emergency brake while the machine is moving. unless an emergency exists. The use of the parking brake as a service brake in regular operation will cause severe damage to the parking brake system.
Parking/Emergency Brake (1.) - Pull the knob up to apply the brake. When the brake is applied, the transmission is in NEUTRAL.Push the knob down to release the brake.Release the brake before moving the machine. Transmission Control Lock (2.) - Engaged (pushed in) - The transmission control is locked in NEUTRAL. Released (pulled out) - The transmission control lever can be moved to the FORWARD or REVERSE position. 1. Left Brake Pedal - The left brake pedal disengages the transmission and brakes the machine. This permits higher engine speed for better hydraulic response.Depress the left brake pedal when positioning and raising the bucket at the same time.Release the pedal to re-engage the transmission and to release the brake. 2. Right Brake Pedal - The right brake pedal slows down the machine ground speed for normal braking. Depress the right brake pedal for normal machine braking. Release the pedal to release the brake.Accelerator Pedal
Accelerator (3.) - Depress to increase the engine speed. Release to decrease the engine speed.The accelerator pedal can be used to shut off the engine by pulling the pedal back past the detent.Transmission Control Lever
Apply the service brake before moving the transmission control lever.
Direction Selector
Forward (1.) - Push the transmission lever forward. The machine will move forward. Neutral (2.) - The machine should not move when lever is in neutral. Reverse (3.) - Pull the transmission lever towards the operator. The machine will move in reverse.Speed Selector
Rotate the transmission control lever to the desired gear speed:1 - First Speed2 - Second Speed3 - Third Speed4 - Fourth SpeedSteering Column Tilting
Lift the latch to RELEASE the steering column. Move the column to the desired position. Release the latch to LOCK the steering column.Machine Warning Horn
Horn Button - Depress the horn button to sound the horn. The horn is used to warn or signal personnel.Electrical Power Supply
Disconnect Switch - Insert the key, and turn it to the right, to turn ON the electrical system. Turn the key to the left to turn OFF the electrical system.Remove the key when leaving the machine. Also, remove it when servicing the electrical system.
Never turn the disconnect key off with the engine running.
Parts washer Caterpillar catalog:
1850595
WASHER GP-WINDOW
345B II, 345B L
345B II, 345B L
3946562
WASHER GP-WINDOW
CB-44B, CB-54B, CD-54B
CB-44B, CB-54B, CD-54B
2588764
WASHER GP-WINDOW
938H, IT38H
938H, IT38H
1491548
WASHER GP-WINDOW
315B FM L
315B FM L
1436354
WASHER GP-WINDOW
322B L, 325B L, 330B L
322B L, 325B L, 330B L
1291894
WASHER GP-WINDOW
769D, 771D, 773D, 775D
769D, 771D, 773D, 775D