WASHER-BEVEL 3127711 - Caterpillar

Illustration 1 g03396238
Table 1
Specification for 280-2052 Final Drive, Brake and Wheel Gp    
Item     Qty     Part     Specification Description    
1     1     190-6099 Shim Pack     Install the shim pack having shims of thickness that is within
0.000 to 0.050 mm (0.0000 to 0.0020 inch).
Total thickness of the shim pack is
3.9 mm (0.15 inch).
Thickness of each shim in the shim pack for seven shims is
0.05 mm (0.002 inch).
Thickness of each shim in the shim pack for eleven shims is
0.25 mm (0.010 inch).
Thickness of each shim in the shim pack for one shim is
0.80 mm (0.032 inch).    
Illustration 2 g03396239
Table 2
Item     Qty     Part     Specification Description    
2     As required, use the following shims to obtain the dimension (D ) to
242.03 0.08 mm (9.529 0.003 inch):    
3 5T-8168 Shim     Thickness is
0.05 mm (0.002 inch).    
2 5T-8042 Shim     Thickness is
0.16 mm (0.006 inch).    
2 5T-8169 Shim     Thickness is
0.80 mm (0.032 inch).    
3     1     205-9874 Speed Sensor Gp     Seal the threads with the white Loctite Low Breakloose PST.
Torque to
30 4 N m (266 35 lb in).    
4     1     5T-8041 Adapter     Apply red Loctite 271 to the threads.
Torque to
55 7 N m (41 5 lb ft).    
5     18     8T-0667 Bolt     Apply red Loctite 271 to the threads after bearing adjustment.
Use the following procedure to tighten the bolts:
1. Install the bolts and tighten to
250 N m (184 lb ft).
2. Loosen every other bolt and then again tighten to
500 50 N m (369 37 lb ft) plus 60 5 degrees of rotation.
3. Loosen the remaining bolts and then again tighten to
500 50 N m (369 37 lb ft) plus 60 5 degrees of rotation.