WASHER 3209325 - Caterpillar

Illustration 6 g03734936
(11) 458-7850 Support Bracket
(12) 2P-9084 Taperlock Stud
(13) 0S-1619 Bolt
(14) 8F-8544 Bolt
Attach bracket (11) to the engine with one taperlock stud (12), one bolt (13), four bolts (14), and the original nut and washers.
Illustration 7 g03734919
(11) 458-7850 Support Bracket
(15) 226-7683 Charging Alternator Gp
(16) 333-1207 Idler As
(17) 279-2589 Idler Pulley
(18) 350-0223 Belt Tensioner
(19) 8T-0644 Bolt
(20) 6V-5839 Washer
Attach idler assembly (16) and idler pulley (17) to the support bracket (11).
Attach belt tensioner (18) to the support bracket (11) with one bolt (19) and one washer (20).
Illustration 8 g03734961
(15) 226-7683 Charging Alternator Gp
(21) 123-0791 Pulley
(22) 6N-8744 Mount
(23) 8T-6685 Bolt
(24) 7X-0578 Hard Washer
(25) 8T-4133 Nut
(26) 8T-4121 Hard Washer
Illustration 9 g06119974
(22) 6N-8744 Mount
(23) 8T-6685 Bolt
(24) 7X-0578 Hard Washer
(25) 8T-4133 Nut
(26) 8T-4121 Hard Washer
Attach alternator (15) to 458-7850 Support Bracket with four mounts (22), four bolts (23), eight washers (24), four nuts (25), and four hard washers (26).Note: One hard washer (24) is installed on each side of mount (22).
Install pulley (21) onto alternator (15).Tighten nut to ... 127 10 N m (94 7 lb ft)
Illustration 10 g03734921
(1) A/C compressor
(15) 226-7683 Charging Alternator Gp
(27) 116-0118 Clip
(28) 350-5812 Serpentine Belt
Attach A/C compressor (1) to the 458-7850 Support Bracket with one clip (27) and the original hardware.
Install serpentine belt (28) onto the engine.
Illustration 11 g03773644
(1) A/C compressor
(15) 226-7683 Charging Alternator Gp
(27) 116-0118 Clip
(29) 3S-2093 Cable Strap
Connect the wiring harness to A/C compressor (1) and alternator (15).
Secure the wiring harness to clip (27) with one cable strap (29).
Illustration 12 g03773643
(C) 50 mm (2 inch)
Reposition the original wiring harness clip. Refer to Illustration 12 for the correct location.
Illustration 13 g03761838
(9) Alternator cover
(15) 226-7683 Charging Alternator Gp
(30) 8T-4984 Hose Clamp
(31) 239-6641 Hose
Install the original alternator cover (9) onto alternator (15) with the original hardware.Torque alternator cover bolts ... 2.25 0.25 N m (20 2 lb in)
Attach hose (31) to the original alternator cover (9) with one hose clamp (30).Torque hose clamp ... 11 1 N m (97 9 lb in)