WASHER-HARD 3E4353 - Caterpillar

Display Navigation Overview
The buttons on the display serve the following functions.Home - Press the home button to return to the default home screen.Back - Press the return button to display the most recent user screen.Acknowledge - Press the acknowledge button to acknowledge any diagnostic notifications and to remove that notification from the current screen.Note: The diagnostic information can still be viewed in the diagnostic screens.Moving from Screen to Screen - Swiping either right or left is used to move from screen to screen.Direct Access Screen - By using the home button, the user can move to a specific screen. Press and hold the home button for one second. The current screen fades and the set of soft buttons shown in Illustration 1 are displayed in a pop-up window.
Illustration 1 g03803019
Direct-access soft buttons
The soft buttons shown in Illustration 1 represent the groups or screens that are available. By swiping to the left, the left-most soft button disappears and the remaining soft buttons shift to the left. The right-most soft button is replaced by another soft button which represents an available screen.
Illustration 2 g03803020
Example of screens available after a left swipe
In the example shown in Illustration 2, the initial set of soft buttons show that the "Engine", "Three60 Pod", and "Tier 4" groups are available. After swiping to the left, the "Three60 Pod" and "Tier 4" remain available, and the "Settings" group appears on the right. Tap any of the three soft buttons, and the first screen for that group will be displayed.Note: The highlighted border around a soft button indicates the last screen for that group that was selected.The pop-up display for a group of soft buttons does not wrap. When all available groups are displayed, you must swipe right to access the previously displayed soft buttons. By swiping to the right, the right-most soft button will disappear and the remaining two soft buttons will shift to the right. The left-most soft button is replaced by another soft button for an available group.Status Bar
Illustration 3 g03803021
Status bar for single engine configuration
(1) Active engine
(2) Alarm/diagnostic indicator (may be red or yellow, flashing, or solid, or not illuminated at all)
(3) Active mode
(4) Active control station
(5) Transmission gear/directionAt the top of the screen is a "Status Bar" like one shown in Illustration 3. The "Status Bar" contains a description of the parameters that are displayed on the current screen.The status bar shown in Illustration 3 shows the following:
A diagnostic indicator is present
The active mode of the vessel
The active station is "Joystick 1"
The transmission is in "Neutral"
Illustration 4 g03803022
Dual Engine configuration
(6) Port engine transmission gear/direction/position
(7) Alarm/diagnostic indicator (may be red or yellow, flashing, or solid, or not illuminated at all)
(8) Active mode
(9) Active control station
(10) Starboard transmission gear/direction/positionThe status bar for a dual engine configuration is shown in Illustration 4 and shows the following:
The port engine transmission is in "Neutral"
A diagnostic indicator is present
The active mode of the vessel
The active station is "Joystick 1"
The starboard engine transmission is in "Neutral"Power Up Screen
Certain screens can appear when the