WASHER 3E4892 - Caterpillar

Illustration 1 g03334170
Table 1
Specification for 386-2934 Rear Gear Gp
Item Qty Part Specification Description
1 1 261-3139 Idler Gear As Before assembly, clean the taper of the camshaft and the tapered bore of the camshaft drive gear with lint free cloth saturated with cleaning solvent to remove excess oil. clean with alcohol wipe.
2 2 261-3137 Idler Gear As After installation, bore of 125-9751 Bushingis 81.060 0.010 mm (3.1913 0.0004 inch).
Installation depth of the bushing is 1.00 0.25 mm (0.039 0.009 inch).
3 1 261-3133 Idler Gear As After installation, bore of 101-1372 Bushingis 75.060 0.010 mm (2.9551 0.0004 inch).
Installation depth of the bushing is 1.50 0.50 mm (0.059 0.019 inch).
4 2 101-1368 Thrust Washer Thickness is 1.90 0.10 mm (0.074 0.004 inch).
5 1 101-1366 Gear Shaft Diameter is 74.990 0.010 mm (2.9523 0.0004 inch).
6 4 8M-2530 Bolt Torque to 140 10 N m (103 7 lb ft).
Illustration 2 g03334173
Rear view
Table 2
Specification for 386-2934 Rear Gear Gp
Item Qty Part Specification Description
7 4 1B-4367 Bolt Torque to 240 20 N m (177 15 lb ft).
8 2 8S-2331 Bolt Torque to 240 20 N m (177 15 lb ft).
9 2 101-1367 Idler Shaft Diameter is 81.000 0.010 mm (3.1889 0.0004 inch).
10 1 101-1365 Thrust Plate Thickness is 6.35 0.25 mm (0.250 0.010 inch).
11 1 261-3140 Before assembly, clean the taper of the camshaft and the tapered bore of the camshaft drive gear with lint free cloth saturated with cleaning solvent to remove excess oil. clean with alcohol wipe.