WASHER-THRUST 4502572 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1 Start By:
Remove the flywheel housing.
Remove the camshaft.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01958943
Use Tooling (A) in order to remove camshaft bearings (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01958943
Use Tooling (A) in order to install camshaft bearings (1). Refer to Specifications, "Cylinder Block" for the correct location of the camshaft bearings. Note: Install all the camshaft bearings with oil hole in alignment with oil hole in the cylinder block.End By:
Install the camshaft.
Install the flywheel housing.