WASHER-THRUST 4685067 - Caterpillar

Illustration 1 g03093225
Table 1
Specification for the 375-7416 Fuel Injection Pump Gp
Item Qty Part Specification Description
Prior to installation of the fuel injector group, lubricate the bore in the cylinder head with 1P-0808 Multipurpose Grease. Use the clamp to press the injector into the bore. Do not tap on the top surface of the injector.
1 1 7F-8698 Bolt Torque to 65 7 N m (48 5 lb ft).
A - - Timing dimension is 64.34 0.20 mm (2.533 0.008 inch).
2 1 361-9354 Fuel Injection Valve Assembly Use the following procedure for tightening the fuel injection valve assembly:
Before assembly, lubricate the bore and the threads with vactra No.2 MSDS 5380.
1. Tighten to 35 N m (26 lb ft).
2. Turn to reach the final turn angle of 19 1 degrees.
3. Final tightening torque should be 115 to 290 N m (85 to 214 lb ft).