WASHER-FLAT 4984065 - Caterpillar

Operator Menu
From the "Main" menu press the "Four Way Navigation" button until "Operator" is highlighted. Press the "OK/Select" button.The "Operator" menu is used to set the "Operator Profile". The "Operator Profile" is a private set of preferences that is identified by a name. Once the "Operator Profile" is created, the operator may associate various items to that profile such as the following components:
Display settings
Language
Units
Lights On Backlight (brightness of display with lights on)
Lights Off Backlight (brightness of display with lights off)
Contrast
Machine Settings
Variable Shift Control
Fuel Management System After all of the parameters have been adjusted, the operator may then save the parameters for future usage.At the next start-up the operator will be prompted to select a previously saved profile. Use the "Four Way Navigation" button in order to highlight the desired profile. Press the "OK/Select" button within 15 seconds in order to select that profile.From the "Operator" menu press the "Four Way Navigation" button until the desired options for the "Operator Profile" are displayed. Press the "OK/Select" button. Select from one of the following menu options:
Select the profile.
Edit the profile.
Create the profile.
Delete the profile.Note: Only the settings available in the operator profile will be stored with the profile.Default
From the "Operator" menu use the "Four Way Navigation" button to highlight the "Default" option. Then press the "OK/Select" button in order to make the default settings active. The default settings are then the active settings and the machine operation will reflect the default settings.Note: If default is selected, the machine operation and display will reflect the last active machine settings.Factory
From the "Operator" menu use the "Four Way Navigation" button to highlight the "Factory" option. Then press the "OK/Select" button in order to make the factory settings active. The Factory settings are then the active settings and the machine operation will reflect the Factory settings.Note: If Factory is selected, the machine operation and display will reflect the original machine settings.Select Profile
From the "Operator" menu use the "Four Way Navigation" button in order to highlight the "Select Profile" option. Press the "OK/Select" button. Use the "Four Way Navigation" button in order to highlight the desired profile. Press the "OK/Select" button. This procedure activates the selected profile and the associated settings. The machine operation will reflect these settings.Note: A maximum of 20 profiles may be used. If a profile is not selected, the machine operation will reflect the last machine settings.Edit Profile
From the "Operator"menu use the "Four Way Navigation" button in order to highlight the "Edit" option. Press the "OK/Select" button. When all of the desired settings have been modified, select "EXIT" and press "OK/Select" in order to save the changes.Create Profile
From the "Operator"menu use the "Four Way Navigation" button in order to highlight the "Create Profile" option. Press the "OK/Select" button. Follow the screen prompts in order to create a name. Save the new name to the existing list of profiles. Once a profile has been created, the operator can use the settings menu in order to set the operating parameters. The parameters that