WASHER 4E1708 - Caterpillar

Illustration 2 g00591625
Lightly lubricate O-ring seals (8) with SAE 30W oil. Install O-ring seals (8) on track roller shaft (7) .
Illustration 3 g00666966
Lightly lubricate the bore of rim assembly (6), the outside surface, and the seal of bushing assembly (10) with SAE 30W oil. Use a press and Tool (C) to install bushing assembly (10) in rim assembly (6). Bushing assembly (10) should move just past the retaining groove in rim assembly (6) .
Illustration 4 g00666967
Use Tool (A) to install retaining ring (5) in rim assembly (6) .
Illustration 5 g00591738
Note: The bushing assembly in the track roller can be damaged during the installation of shaft (7) in rim assembly (6). Be careful when shaft (7) is positioned.
Rotate the track roller by 180 degrees. Install track roller shaft (7) in rim assembly (6) .
Illustration 6 g00591739
Lightly lubricate the bore of rim assembly (6), the outside surface, and the seal of bushing assembly (10) with SAE 30W oil. Use a press and Tool (C) to install remaining bushing assembly (10). Bushing assembly (10) should move just past the retaining ring groove in rim assembly (6) .
Illustration 7 g00591741
Use Tool (A) to install retaining ring (5) in rim assembly (6) .
Illustration 8 g00591622
Rotate the track roller assembly by 180 degrees. Use a press against track roller shaft (7) in order to move opposite bushing assembly (10) against retaining ring (5) .
Illustration 9 g00591620
Note: Refer to Disassembly and Assembly, "Duo-Cone Conventional Seal