WASHER GP-WINDSHIELD 4E6418 - Caterpillar

Illustration 3 g00757361
Connect harness assembly (20).
Illustration 4 g00757354
Install cable strap (19).
Illustration 5 g00757266
Install nut (17) on the shaft of the window wiper motor.
Illustration 6 g00757193
Install cover (16).
Apply Tooling (B) to the threads of the window wiper motor.
Illustration 7 g00758020
Install window wiper (14). Install the window wiper at Dimension (X). Dimension (X) is the distance from the end of window wiper (14) to the trim on the cab front window. Dimension (X) is 76 mm (3.0 inch).
Illustration 8 g01087957
Install nut (13). Tighten nut (13) to a torque of 24 1 N m (17 1 lb ft).
Install cap (12) over nut (13).
Illustration 9 g00757135
Install tube (15) on window wiper blade (14).
Illustration 10 g00488225
Connect the hose of the washer fluid bottle to the fitting. Install the hose to dimension (A). Dimension (A) is 1.0 mm (0.04 inch). Note: Do not use petroleum lubricants on the hose ends. Do not stretch the hose between connections.
Illustration 11 g00757348
Install the headliner in position.
Install retainers (11).
Repeat Step 14 for the other side.
Illustration 12 g00757347
Connect harness assemblies (10) to light (9).
Illustration 13 g00757344
Install light (9) into the headliner.
Illustration 14 g01087955
Install face plate opening (8) with screws (7).
Illustration 15 g00757274
Install speaker cover (6) with screws (5).
Repeat Step 19 for the other side.
Illustration 16 g01087953
Install mirror (1) with washer (4) and nut (3).
Illustration 17 g01087950
Install cap (2) on mirror (1).
Move the start switch to the ON position.
Move the switch of the front window wiper to the ON position. Check the movement of the wiper blade and the motor operation.