WASHER-HARD 4K2287 - Caterpillar

Personal injury or death can result from high voltage.When power generation equipment must be in operation to make tests and/or adjustments, high voltage and current are present.Improper test equipment can fail and present a high voltage shock hazard to its user.Make sure the testing equipment is designed for and correctly operated for high voltage and current tests being made.When servicing or repairing electric power generation equipment:
Make sure the unit is off-line (disconnected from utility and/or other generators power service) , and either locked out or tagged DO NOT OPERATE.
Remove all fuses.
Make sure the generator engine is stopped.
Make sure all batteries are disconnected.
Make sure all capacitors are discharged.Failure to do so could result in personal injury or death. Make sure residual voltage in the rotor, stator and the generator is discharged.
When work is being done on a generator, the following general rules should be used as a guide:
Before you work on the generator, the operating principles must be understood.
The generator is a constant speed unit. RPM that varies can cause terminal voltages to vary. If RPM exceeds the rated RPM by 5% to 10%, voltage could exceed the rated output voltage by 5% to 10%. If RPM is 5% to 10% lower than the rated RPM, voltage could be 5% to 10% lower than the rated output voltage.
Generator heat is caused by line current. As the line current increases, the generator temperature increases.
Some discrete instrumentation will not accurately show a generator kVA load. The instrumentation includes ammeters, wattmeters and voltmeters. The instrumentation will not accurately show the kVA load due to the power factor of the load.