WASHER 5174535 - Caterpillar

Illustration 1 g03830601
Table 1
Specification for 452-6390 Oil Pan Gp    
Item     Qty     Part     Specification Description    
1     -     -     Before assembly, as required apply red Loctite 593 to the gasket joints.    
2     10     1A-2029 Bolt     Use the following procedure in order to tighten the bolts of the plate:
1. Tighten five bolts (3) to a standard torque.
2. Tighten bolt 1 through bolt 10 in a numerical sequence that is shown in Illustration 1 to a standard torque.    
3     5     1A-2029 Bolt    
4     2     6V-4315 O-Ring Seal     Lubricate the bore lightly with the lubricant that is being sealed.    
5     50     5P-5855 Bolt     As required, apply blue Loctite 243 to the open top end of the bolt holes after assembly of the oil pan.    
6     1     142-4159 Integral Seal     Before assembly, as required apply red Loctite 593 to the sealing surface of the integral seal.    
7     2     3P-0654 O-Ring Seal     Lubricate the bore lightly with the lubricant that is being sealed.    
8     -     -     Before assembly, as required apply red Loctite 593 to the surface.    
9     4     5P-5700 O-Ring Seal     Lubricate the bore lightly with the lubricant that is being sealed.    
10     1     6I-0723 Oil Drain Plug     Lubricate the bore lightly with the lubricant that is being sealed.
Torque to
55 7 N m (41 5 lb ft).    
11     -     -     Before assembly, as required apply red Loctite 593 to the surface.    
12     1     4B-2363 Oil Drain Plug     Torque to
145 15 N m (107 11 lb ft).