WASHER 5M7280 - Caterpillar

Table 1
Torque Converters
Part Number Engine hp
288-2659 C9 through C13 Less than 400
288-2661 C9 through C13 Greater than 400
288-2676 C15
Illustration 1 g01821373
Front view
Illustration 2 g01759556
Typical example
Section A-A
(1) Torque for 44 bolts ... 60 7 N m (44 5 lb ft)
Illustration 3 g01821376
Typical example
Section B-B
(2) Torque for six bolts ... 30 5 N m (22 4 lb ft) (3) Torque for the plug ... 285 15 N m (210 11 lb ft) (4) Torque for the bolt ... 285 15 N m (210 11 lb ft)Note: Before you assemble pilot (5) into the bore of the clutch housing assembly (7), lubricate the O-ring seal (6) with the clean transmission oil after you install the O-ring seal into the groove.Note: Before you assemble piston (8) into the bore of the clutch housing assembly (7), lubricate two seal rings (9) with the clean transmission oil after installing the seal rings into the groove. (10) Thickness of two new friction discs and two new plates for 288-2661 and 288-2676 torque converters is 12.24 0.30 mm (0.482 0.012 inch): 275-5308 Friction Disc Quantity ... 2Thickness of one friction disc ... 3.81 0.10 mm (0.150 0.004 inch)