WASHER-HARD 5P1075 - Caterpillar

Caterpillar Products AllA change has been made to Service Magazine, SEPD0723, 01, March 2004 , "Ordering a Replacement Machine Identification Plate". The content has changed.Ordering a Replacement Machine ID Plate for ALL Caterpillar Products
A Product Identification Number (PIN) is used on all Caterpillar machines and Caterpillar generator sets for identification worldwide. For Caterpillar products in Europe, the identification plates incorporate service information and the CE mark for the certification in Europe. High strength adhesive will attach the identification plates.Dealers can place an order for the part number for the appropriate replacement machine identification plate in either the ANTARES system or the Dealer Business System. When the order is placed in ANTARES, be sure to include the required information in the Special Instructions field. If the information is missing, the Direct Ship analyst will contact the ordering dealer and request the information. If the information is not provided within 24 hours, then the Direct Ship analyst will cancel the order and advise the dealer why the order was canceled.Required information for the following replacement PIN plates 239-6986, 239-6987, and 239-6988:
Model number for the machine
Serial number for the machineRequired information for replacement PIN plate for 239-6989:
Model number for the machine
Serial number for the machine
Engine model number
Engine serial number
Engine arrangement number
Transmission serial number
Transmission arrangement numberIf the machine is located in a European country that requires a CE mark, the special instructions must also include “CE MARK NEEDED”.The supplier will process the order for the replacement machine identification plate and will record the order for the replacement machine identification plate.The replacement machine identification plates will be stamped "DUPLICATE". Dealer personnel should verify the PIN number on the replacement PIN plate with the PIN numbers that are stamped in the frame of the product.The Process for Ordering a Replacement Machine Identification Plate
Dealers can use the following process to order a replacement machine identification plate.
Place an order for the part number for the appropriate replacement machine identification plate in either the ANTARES system or the Dealer Business System.
When you place the order directly in the ANTARES system, the required information in step 4 must be entered in the Special Instructions Field.
When you place the order directly in the Dealer Business System, the required information in step 4 must be sent via e-mail to Replacement Pinplate. In the e-mail to Replacement Pinplate , you should reference the “PSO Number” of the order for the replacement machine identification plate.
The following information is the required information that must be entered in the Special Instructions Field on orders that are placed through the ANTARES system. The following information is the required information that must be sent via e-mail to Replacement Pinplate.Required information for the replacement PIN plates
Product Identification Number
Model Number
The person that gets the new plate
The indicator for the country “Made In”
When you place the order directly in the ANTARES system, the following information is the optional information that can be entered in the special instructions field. The optional information can also be sent via e-mail to Replacement