WASHER 6V8489 - Caterpillar

Table 11
DATA IDENTIFIER CHART    
DATA NAME
   
DATA
I.D.    DATA
BYTE
COUNT    DATA RESOLUTION    
BYTE
NUMBER
DESCRIPTION
SCALING
RANGE    
System Units Setting
    $CF
    1
    1
    system units
    binary format
    $00=metric units
$01-$FF =US units    
Maximum (Target)
Weight Setting     $D0
    2
    1-2
    maximum (target)
weight     .907 tonnes/bit
(1 US ton/bit)     see maximum (target)
weight range chart    
Truck I.D. Code Setting
    $D1
    1
    1
    truck I.D.
code number     binary format
    1-199
   
System Options
Code Setting     $D2
    1
    1
    system options code
    binary format
    1-24
(see options chart) (1) (2)    
System Calibration     $DC     1     1     do system calibration     refer to documentation    
System Diagnostics
    $D3
    6
    1-3
4-6     hard faults
intermittent faults     refer to documentation
refer to documentation    
Suspension Cylinder Pressures
    $D4
    8
    1-2
3-4
5-6
7-8
    LF cylinder pressure
RF cylinder pressure
LR cylinder pressure
RR cylinder pressure
    6.895 kPa/bit
(1 psi/bit)
6.895 kPa/bit
(1 psi/bit)
6.895 kPa/bit
(1 psi/bit)
6.895 kPa/bit
(1 psi/bit)     0-28500 kPa
(0-4125 psi)
0-28500 kPa
(0-4125 psi)
0-28500 kPa
(0-4125 psi)
0-28500 kPa
(0-4125 psi)    
Vehicle Speed
    $D5
    2
    1-2
    vehicle speed
    0.18 kph/bit
(0.1 mph/bit)     0-122.0 kph
(0-70.0 mph)    
Truck Operating Mode
    $DB
    1
    1
    truck operating mode
    binary format
    $00=stopped empty
$01=traveling empty
$02=loading
$03=stopped loading
$04=traveling loaded
$05=dumping    
( 1 ) (earlier TPMS) corresponds to data format used by TPMS
( 2 ) (TPMS with RTC) corresponds to data format used by TPMS with real time clock