WASHER 6Y5010 - Caterpillar

Illustration 1 g02560278
Table 1
Specification for the 198-7746 Electric Starting Motor Gp, and 205-7687 Electric Starting Motor Gp
Item Qty Part Specification Description
1 2 6V-8188 Nut Torque to 30.5 3.5 N m (269.9 31.0 lb in).
2 1 206-8787 Solenoid Kit Current consumption at 10V and 25 °C (77 °F):
1. For Pull-in windings is 97 Amp
2. For Hold-in windings is 18 Amp
3 1 6V-8188 Nut Torque to 30.5 3.5 N m (269.9 31.0 lb in).
A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (3). A maximum of two of the terminals may be equal to or greater than 0 AWG.
4 1 095-7930 Screw Torque to 1.70 0.25 N m (15.05 2.21 lb in).
5 2 6V-8378 Nut Torque to 2.25 0.25 N m (19.91 2.21 lb in).
6 1 Bolt Torque to 8 3 N m (71 27 lb in).
B - - The clearance between the pinion and the housing is 9.1 mm (0.36 inch).
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
No load conditions at 25 °C (77 °F)
1. Speed is 6900 1800 rpm
2. Current draw is 127.5 27.5 Amp
3. Voltage is 11 V