WASHER 7C5599 - Caterpillar

The Generator Set Control Panel provides controls, monitoring and protection devices needed to operate the engine and generator safely and efficiently. The Generator Set Control Panel has an Engine Control Switch (ECS) for starting and stopping the engine, an Emergency Stop Push Button (ESPB) for emergency stopping of the engine, various gauges and indicator lamps.
(1) AC Voltage Meter. (2) Frequency Meter. (3) AC Ammeter. (4) Ammeter/Voltmeter Phase Selector Switch (AVS). (5) Pump Stop Pushbutton. (6) Starting Aid Switch. (7) Pump Run Pushbutton. (8) Fault Indicator Lights. (9) Speed Adjust Potentiometer. (10) Voltage Adjust Rheostat (VAR). (11) Engine Coolant Temperature. (12) Battery Voltage Meter. (13) Engine Oil Pressure. (14) Service Hour Meter. (15) Emergency Stop Push Button (ESPB). (16) Warning Reset Lamp Test. (17) Alarm Horn. (18) Engine Control Switch (ECS). (19) Alarm Silence Button.* The Pump Stop Pushbutton (5) (optional) is used in conjunction with the generator mounted automatic fuel transfer system (if equipped). The pump stop pushbutton is used to manually stop the AC fuel transfer pump. The pump stop pushbutton can be reset by depressing it a second time.* The Starting Aid Switch (SAS) (6) (optional) is used to inject ether into the engine for starting in harsh weather conditions. When the ECS is in the Manual Start position and the SAS is pressed and held in the ON position, the start aid solenoid valve (SASV) energizes and meters a specific amount of ether into a holding chamber. When the SAS is released, the SASV de-energizes and the ether is released to the engine. * The Pump Run Pushbutton (7) (optional) is used in conjunction with the generator set mounted automatic fuel transfer system (if equipped). Pushing the pump run pushbutton will cause the generator set mounted AC fuel transfer pump to fill the generator set day tank. The pump will automatically shut off when the fuel level contactor reaches the high fuel level. The pump can also be shutoff manually by depressing the Pump Stop Pushbutton.* The Speed Adjust Potentiometer (optional) (9) is used to raise or lower the engine speed when the generator set is fitted with an electronic governor. The Generator Set Control Panel can be equipped with either the governor control switch, the speed adjust potentiometer, or neither.* The voltage adjust rheostat (10), is used to adjust the generator output voltage.* The emergency stop pushbutton (ESPB) (15) is used to shut down the engine during an emergency situation. The ESPB shuts off the fuel and activates the optional air shutoff (if equipped).* The engine control switch (ECS), (18), determines the status of the control panel. In the AUTOmatic position (3 o'clock), the engine will start automatically whenever the remote initiating contact is closed. The engine will shutdown after the initiating contact opens. When the ECS is in the MAN. START position (9 o'clock), the engine will start and run as long as the ECS remains in this position.When the ECS is in the OFF/RESET position (12 and 6 o'clock), the fault lights