WASHER-THRUST 9C5040 - Caterpillar

All ModelsWarranty Category: Y
131-5050 DataView Group (PC not included)Caterpillar DataView is a portable diagnostic tool that allows data, measured by sensors temporarily installed on Caterpillar products to be viewed on a Personal Computer. It allows many of the individual hand-held diagnostic tools currently in use by technicians to be replaced with a single unit. DataView also allows diagnostic data to be shared with other PC programs, such as the Caterpillar Service Information System (SIS) and the Caterpillar Electronic Technician (ET). DataView can be used with all Caterpillar products. DataView consists of a portable hardware instrument (DataView hardware) which connects to a standard PC via the parallel printer port and a Windows based software program (DataView software) that runs on the PC. The DataView software program provides setup, digital displays, graphs, and data logging of the measurements being taken. The hardware will accept up to nine standard Caterpillar sensors. A parallel port on DataView is provided for operating a printer when DataView is attached to the PC. DataView operates from an internal battery pack, but can also be powered from an external power source (110 to 220 Volts AC). Power can also be taken directly from a machine battery of 11 to 40 Volts DC or by using a vehicle 12 Volt or 24 Volt cigarette lighter.
Caterpillar PC-Based Diagnostic Tools. - A future version of DataView software will provide startup of DataView from the Tool Box Manager. Features/Benefits
* PC-based diagnostic tool. Accepts up to nine standard Caterpillar sensors for measurements on any engine or machine. Allows data to be displayed on a Personal Computer (PC).* Includes Data Logger using 2 Mbyte PC Memory Card for storage. Data Logger has Auto Triggering and Pre-Trigger information settings.* Measures pressure, temperature, blowby, position, RPM, Hz, duty cycle (PWM), hydraulic flow, and fuel flow.* DataView hardware unit connects to standard PC parallel (printer) port. DataView software program runs on PC using Microsoft Windows/tm/ or IBM OS/2/tm/ operating system.* Allows many current hand-held diagnostic tools to be replaced with a single diagnostic unit.* Includes digital and analog measurements, bar graphs, charts, and histograms in real time or Data Logged data. * DataView can provide test/diagnostic data for test facilities such as dynamometer rooms, transmission test centers, or any other application where diagnostic measurements are required.* Future versions of DataView software will interface with other programs such as SIS and ET. * Six "Analog" inputs for measuring any combination of pressure, temperature, blowby, and position.* Three "Frequency" inputs for measuring RPM, Hz, duty cycle (PWM), hydraulic flow, and fuel flow.* Two "Engine Set Point" inputs.* Calculated channels for displaying sum, difference, and hydraulic horsepower.* Automatic sensor identification of "Analog" sensors for automatic set-up using Auto ID cables (optional).* RS232 input connector for future Digital Multimeter (DMM).* Portable TechStation carrying case holds DataView and a portable PC.* Internal battery operates for up to eight hours.* Operates and charges on 110/220 VAC, 11 to 40 VDC, or 12V Automotive Cigarette Lighter.* CE certified for European use. Specifications/Technical