WASHER-THRUST 9G9346 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    Start By:
Separate the transmission and the torque converter. Refer to Disassembly and Assembly, " Transmission and Torqe Converter - Seperate".
Remove the bypass valve. Refer to Disassembly and Assembly, " Bypass Valve - Remove and Install".
Remove the modulating valve. Refer to Disassembly and Assembly, " Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01222538
Attach Tooling (A) and a suitable lifting device to No. 1 rotating clutch and plate (1). The weight of No. 1 rotating clutch and plate (1) is approximately 159 kg (350 lb). Remove bolts (2) and (3). Remove No. 1 rotating clutch and plate (1) .
Illustration 2 g00803903
Remove bolts (5) .
Illustration 3 g01222546
Attach Tooling (A) and a suitable lifting device to torque converter housing (6). The weight of torque converter housing (6) is approximately 159 kg (350 lb). Remove bolts (7) and torque converter housing (6) .