WASHER 9R8544 - Caterpillar

Engine Lifting
Illustration 1 g01020684
Improper lift rigging can allow unit to tumble causing injury and damage.
Illustration 2 g02858678
Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam to lift the engine. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted.Some removals require lifting fixtures in order to obtain proper balance. Lifting fixtures also help to provide safety.To remove the engine ONLY, use the lifting eyes that are on the engine.Lifting eyes are designed and installed for the specific engine arrangement. Alterations to the lifting eyes and/or the engine make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that proper lifting devices are provided. Consult your Cat dealer for information regarding fixtures for proper engine lifting.
Table 1
Dimensions for the Lifting Beam
Engine A B C
3512 1096 mm (43.0 inch) 1652 mm (65.0 inch) 12° Max
3516 1096 mm (43.0 inch) 2192 mm (86.3 inch) 12° Max
Table 2
Engine Weight
Engine Approximate Net Dry Engine Weight Without Transmission
3512C 7445 kg to 7670 kg 16415 lb to 16910 lb
3516C 8900 kg to 9400 kg 19625 lb to 20725 lb Engine and Marine Transmission Lifting
Illustration 3 g00103228
Do not use the eyebolts that are on the marine transmission housing to lift the engine.
To remove both the engine and the marine transmission, use the lifting eyes that are on the engine. Use an adjustable lifting beam to lift the engine. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted. Consult your Cat dealer or consult the OEM for information regarding fixtures for proper lifting of your complete package.Marine Transmission Lifting
To remove the marine transmission ONLY, use the eyebolts that are on the marine transmission housing. Refer to the OEM for proper lifting instructions (if equipped).If a component resists removal, ensure that all of the nuts and bolts have been removed. Ensure that no adjacent parts are interfering.