WATER PUMP GROUP 1637787 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01104240
Disconnect harness assembly (1) from injection actuation pressure sensor (2) .
Remove injection actuation pressure sensor (2) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01104240
Install injection actuation pressure sensor (2). Tighten the injection actuation pressure sensor to a torque of 20 2 N m (15 1 lb ft).
Connect harness assembly (1) to injection actuation pressure sensor (2) .