WATER PUMP GROUP 3S7553 - Caterpillar

When Required Engine Air Intake System - Service filters Fuel System - Service when loss of power Ether Starting Aid Cylinder - Replace Batteries - Inspect Radiator - Replace cap, clean core Fuses and Circuit Breakers - Replace/reset Suspension Seat - Lubricate 9 fittings Power Train Oil System - Clean screens Hook Control Linkage - Adjust Hook Load Line - Install cable Towing Winch (if equipped) - Inspect/replace cable Every 10 Service Hours or Daily Engine Oil - Check DEO oil level Power Train Oil System - Check TDTO oil level Hydraulic Oil - Check HYDO oil level Cooling System - Check coolant level Tracks - Inspect Towing Winch (if equipped) - Check TDTO oil level Fuel Tank - Drain water and sediment Walk-Around Inspection - Inspect machine Seat Belt - Inspect Indicators and Gauges - Test/Inspect Back-up Alarm - Test Sheave Block Bearings - Lubricate fittings Boom Pivot Pins - Lubricate fittings Boom Cylinder Bearings - Lubricate fittings Boom Swivel Bearing - Lubricate fitting Counterweight Hinge Pins - Lubricate fittings Counterweight Cylinder Bearings - Lubricate bearings Every 50 Service Hours or Weekly* Tracks - Inspect Every 250 Service Hours or Monthly* Engine Oil and Filter - Change DEO oil and filter. If sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce oil change interval by one half Engine Valve Lash - Adjust on new or reconditioned engines at first oil change only Brakes - Test Tracks - Adjust Cooling System - Change the element Fan and Alternator Belts - Inspect/Adjust Fan Drive and Idler Pulley - Lubricate fittings Final Drive Oil - Check TDTO oil level Pivot Shaft Bearings - Lubricate fittings Batteries - Inspect Every 500 Service Hours or 3 Months* Engine Crankcase Breather - Clean Power Train Oil System - Change filter Hydraulic System - Change filters Fuel System - Clean/change filters Fuel Tank Cap and Fill Screen - Clean Recoil Spring Oil Compartment - Check TDTO oil level Bogie Pads - Inspect Winch Filter and Strainer - Clean/change Every 1000 Service Hours or 6 Months* Power Train Oil System - Change TDTO oil Towing Winch (if equipped) - Change TDTO oil Every 2000 Service Hours or 1 Year* Hydraulic Tank Oil - Change HYDO oil Final Drives - Change TDTO oil Engine Valve Lash - Adjust Engine Valve Rotators - Check Track Roller Frame Guides - Measure wear Every 3000 Service Hours or 2 Years* Cooling System - Add Extender (Engines Using LLC Only) Cooling System Coolant - Change coolant Every 6000 Service Hours or 4 Years* Cooling System - Clean/Flush if using (LLC)*First Perform Previous Service Hours Items