WEAR STRIP 0328386 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 504-9791 Lift Gp (60 Hz)(1) 2
OR
504-9793 Lift Gp (50 Hz)(2) 2
B - Tube(3) 1
C 5P-9694 Ratchet Puller 1
(1) High-Voltage (480V) Low-Voltage (240V)
(2) High-Voltage (400V) Low-Voltage (200V)
(3) The tube is made of SAE 1026 cold drawn seamless tubing. The tube has a 69.85 mm (2.750 inch) outer diameter. The tube has a 12.7 mm (0.50 inch) minimum wall thickness. The tube has a length of 1822 mm (72.0 inch).
Illustration 1 g01822535
Use Tooling (C) and a lift truck to install tire and rim (1). The weight of tire and rim (1) is approximately 421 kg (928 lb).
Illustration 2 g01822536
Install nuts (2) onto tire and rim (1).
Illustration 3 g06304482
Lower the machine to the ground. Remove Tooling (A). Refer to Tool Operating Manual, NEHS1303 , "Lift Group (Stand - 25 Ton)" for more information on Tooling (A).
Remove Tooling (B).