WEDGE 1236713 - Caterpillar

Illustration 2 g01039965
Disconnect hose assemblies (2), hose assemblies (5), and hose assembly (6). Remove bolts (3). Position pressure reducing valve (4) out of the way.
Illustration 3 g01039967
Disconnect harness assemblies (9) and harness assembly (7) from the transmission case.
Remove bolts (12) and reposition harness assembly (11) .
Remove bolts (10) from cover (8). Reposition hose assembly (13). Remove cover (8) .
Illustration 4 g01039970
Remove bolts (14) and guard (15) from the manifold assembly.
Illustration 5 g01039979
Remove bolts (16) and cover (17) from the control valve assembly.
Illustration 6 g01039981
Remove control valve assembly (18) from the selector pressure control valve.
Illustration 7 g01039982
Remove plugs (22) and the O-ring seals from manifold assembly (21). Remove bolts (20), cover (19), and the gasket from manifold assembly (21) .
Illustration 8 g01039984
Remove tubes (28) from manifold assembly (21) .
Disconnect harness assembly (27). Remove bolts (24). Remove switch assembly (23) from manifold assembly (21) .
Disconnect harness assembly (29) from manifold assembly (21) .
Remove bolts (25) that secure manifold assembly (21) to the transmission case. Separate manifold assembly (21) from the transmission case. Remove the retaining ring that secures cable assembly (26) to the back side of manifold assembly (21). Remove cable assembly (26) from the manifold assembly. Remove manifold assembly (21) from the transmission.
Illustration 9 g01039985
Remove bolts (30), the washers, and four half flanges (32) that secure the tube assemblies (31) to manifold (33). Disconnect tube assemblies (31). Remove the O-ring seals from tube assemblies (31) .
Illustration 10 g01039986
Remove bolt (34) and nuts (35) that secure manifold (33) to the transmission case. Remove manifold (33). Remove the O-ring seals from manifold (33) .
Illustration 11 g01039987
Remove sleeves (36). Remove O-ring seals (37) from each end of sleeves (36) .
Illustration 12 g01039989
Remove bolts (39) and bolt (38). Remove selector pressure control valve (40) .
Illustration 13 g01039990
Remove bolt (41) and plate (42) from the manifold.
Illustration 14 g01039992
Remove bolts (43). Slide two sleeves (46) out of the manifold and the transmission case assembly. Remove the two O-ring seals from each sleeve (46) .
Remove bolts (48). Remove the sleeve and elbow (49). Remove the two O-ring seals from the sleeve.
Remove bolts (45). Remove sleeves (44) and manifold (47) as a unit from the tractor transmission manifold assembly.
Remove sleeves (44) from manifold (47). Remove the O-ring seals from the bottom of manifold (40). Remove the O-ring seals from each of the sleeves (44) .