WEDGE-PLUG LOCK 1552261 - Caterpillar

Cross-Reference Information for Event Codes
Table 1 is a list of the event codes for the engine. The event codes are cross-referenced with the appropriate procedure that can be used to troubleshoot the code.Event codes are generated when abnormal operating conditions exist. A further explanation of event codes and the engines monitoring system are described after Table 1.
Table 1
Cross-Reference from Event Codes on Cat Data Link to Troubleshooting Procedure
Code and Description Troubleshooting Procedure
E007(2) High Aftercooler Temperature Derate Troubleshooting, "Coolant Temperature Is High"
E008(3) High Aftercooler Temperature Shutdown Troubleshooting, "Coolant Temperature Is High"
E009(2) High Altitude Derate Troubleshooting, "High Altitude Derate Occurrence"
E012(2) High Crankcase Pressure Derate Troubleshooting, "Crankcase Pressure Is High"
E013(3) High Crankcase Pressure Shutdown Troubleshooting, "Crankcase Pressure Is High"
E015(2) High Engine Coolant Temperature Derate Troubleshooting, "Coolant Temperature Is High"
E016(3) High Engine Coolant Temperature Shutdown Troubleshooting, "Coolant Temperature Is High"
E017(1) High Engine Coolant Temperature Warning Troubleshooting, "Coolant Temperature Is High"
E021(2) High Exhaust Temperature Derate Troubleshooting, "Exhaust Temperature Is High"
E031(2) Air Filter Restriction Derate Troubleshooting, "Inlet Air Is Restricted"
E038(1) Low Engine Coolant Temperature Warning Troubleshooting, "Coolant Temperature Is Low"
E040(3) Low Engine Oil Pressure Shutdown Troubleshooting, "Oil Pressure Is Low"
E043(1) Low System Voltage Warning Troubleshooting, "Electrical Power Supply - Test"
E095(1) Fuel Filter Restriction Warning Troubleshooting, "Fuel Filter Is Restricted"
E099(1) Engine Oil Filter Restriction Warning Troubleshooting, "Oil Filter Differential Pressure Problem"
E100(1) Low Engine Oil Pressure Warning Troubleshooting, "Oil Pressure Is Low"
E101(1) High Crankcase Pressure Warning Troubleshooting, "Crankcase Pressure Is High"
E173(1) High Exhaust Temperature Warning Troubleshooting, "Exhaust Temperature Is High"
E190(1) Engine Overspeed Warning Troubleshooting, "Engine Overspeeds"
E225(3)Engine Overcrank The number of crank cycles has exceeded one of the following programmable parameters:
"Starting System #1 Maximum Number of Crank Cycles"
"Starting System #2 Maximum Number of Crank Cycles"
If a problem with the engine is suspected, refer to Troubleshooting, "Engine Cranks but does Not Start" for information that is related to troubleshooting a starting related problem.
E272(1) Inlet Air Restriction Warning Troubleshooting, "Inlet Air Is Restricted"
E279(1) High Aftercooler Temperature Warning Troubleshooting, "Coolant Temperature Is High" Parts of the Event Code
Event Code - The "E" identifies the code as an event code. The "XXX(X)" represents a numeric identifier for the event code. The fourth "(X)" assigns one of three levels to the active event code according to the severity of the abnormal system condition. This action is followed by a description of the code. Refer to the following example:
E360(1) Low Oil Pressure
E360(2) Low Oil Pressure
E360(3) Low Oil PressureThe definition for the levels of severity for an event are defined below:Level 1 - Level 1 alerts the operator that an engine system requires attention. The operator should check that the involved system condition or the operator should perform maintenance on the involved system at the earliest possible time.Level 2 - Level 2 requires a change in the operation of the engine or the performance of a maintenance procedure. Failure to correct the problem that caused this warning may result in damage to the engine components.Level 3 - Level 3 requires an immediate safe shutdown of the engine in order to avoid damage to the