WEIGHT GP-ECC 2279600 - Caterpillar

Product Identification & Serial Number Locations
The Product Identification Number (PIN) is used to identify the machine when ordering parts or for use in the event of a product support program. A record of the PIN can also be used by law enforcement for investigating a stolen machine.In addition to the PIN, serial numbers for the transmission, engine, and cab are located on the machine for identifying these major components.For future reference, record the identification numbers in the spaces provided below the photographs.
Label is located on left side frame rail. PIN is also stamped into radiator support plate at front of machine.Product Identification Number (PIN) ____________________
Plate is located on lower right side of engine block.Engine Serial Number ____________________
Plate is located on lower right portion of transmission, below transmission control valves.Transmission Serial Number ____________________
Plate is located below rear window inside of the cab.Cab Serial Number ____________________ Right Belt Serial Number ____________________Left Belt Serial Number ____________________ Right Undercarriage Serial Number ____________________Left Undercarriage Serial Number ____________________General Specifications
Overall Dimensions
(A) 3074 mm (121 in). (B) 3199 mm (126 in). (C) 828 mm (32.6 in). (D) 1316 mm (51.8 in). (E) 969 mm (38.1 in). (F) 2187 mm (86.1 in). (G) 610 mm (24.0 in). (H) 5658 mm (222.75 in). (J) 557 mm (21.9 in).* Overall Width To calculate overall width, add 800 mm (31.5 in) to track gauge. Example: If machine gauge is 60 inches, overall width is 60+31.5=91.5 inches. If 813 mm (32 in) wide belts are used, add an additional 13 mm (0.5 in) to the calculated width.* Crop Clearance 480 mm (18.9 in) on 762 mm (30 in) rows.* Turning Radius This tractor is capable of counter-rotating the tracks to achieve a complete turn within its length.Operating Weights
Shipping weight: 9832 kg (21,630 lb) Maximum Operating Weight: 11 567 kg (25,500 lb). Refer to the Adjusting Machine Balance topic for more information on tractor ballasting.Engine Specifications
Transmission
The transmission consists of a direct drive full powershift with 16 forward, nine reverse speeds and programmable electronic controls, power shuttle capability and five other shift methods are standard. An available creeper option adds an additional 16 forward and nine reverse speeds below 3.2 km/h (2 mph). With the creeper engaged, speed reduction is 10.6:1.Electrical System
Brakes
This tractor uses oil-cooled disc type brakes located inside the final drives. One multiple-disc brake per side is actuated via single brake pedal.The parking brake is a dry disc type, acting on differential input shaft. The parking brake provides emergency secondary braking capability. Undercarriage
The undercarriage uses the Caterpillar Mobil-trac System with five axles per side, rubber isolation mounting between front support beam and tractor main structure. Two mounting locations allow chemical tanks to be mounted on the outside of the undercarriage.Spacers are used to adjust track gauge from 1524 mm (60 in) to 2286 mm (90 in) in 50.8 mm (2 in) increments. Spacers are available from your Caterpillar dealer.Available track widths: 406 mm (16 in), 457 mm (18 in), 508 mm (20