AVSPARE.COM
parts catalog

WHEEL 0005247 - Caterpillar



0005247 WHEEL Caterpillar parts WHEEL
Rating:
76
Alternative (cross code) number:
CA0005247
000-5247
0005247
Caterpillar 0005247 WHEEL
Weight: 18 pounds 8 kg.

Buy WHEEL 0005247 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Procedure to Fold the Blade
Illustration 45 g02283793
Unlock the removable side of the blade.
Slightly raise the blade in order to clear the blade from the ground.
Remove the cotter pin and pins (1) .
Pull out bar (2) after having removed both of the retention cotter pins.
Illustration 46 g02283814
Fold the removable side of the blade. Place the end of bar (2) in the hole at the top left corner of the blade and push in order to fold the blade.
Illustration 47 g02283840
Place bar (2) and pins (1) as shown in Illustration 47 in order to lock the removable side of the blade.Note: Proceed to Steps 4 through 8 for LGP machines only.
Illustration 48 g02295654
Remove right-hand pins (3) from each link. Refer to Illustration 48 for the correct pins to remove.
Illustration 49 g02295673
Left-hand side pin placement
Illustration 50 g02295693
Right-hand side pin placementNote: The angling cylinders must be actuated slowly and without jerks to avoid hitting the blade.
From the cab, block the blade in flat position on the ground and actuate the angling cylinders to the right in order to place the links in the transportation position. Refer to illustrations 49 and 50 for the transportation position for the links.
Insert the left-hand pin as shown in Illustration 49.
Insert the right-hand pin as shown in Illustration 50.
From the cab, slightly raise the blade and make the blade completely swivel to the left.Procedure to Unfold the Blade
Note: Perform Steps
Illustration 51 g02296596
Left-hand side pin placement
Illustration 52 g02296614
Remove the right-hand pins from each link.
From the cab, slightly raise the blade and make the blade swivel to the right until the blade is perpendicular to the machine centerline.
Illustration 53 g02283840
Remove pins (1) and bar (2) in order to unlock the removable side of the blade.
Illustration 54 g02283814
Unfold the removable side of the blade. Place the end of bar (2) in the hole at the top left corner of the blade and push in order to unfold the blade.
Illustration 55 g02283793
Lock the removable side of the blade.
Place bar (2) at the rear of the blade and attach with two cotter pins.
Install pins (1) in order to secure the blade in the working position.
Illustration 56 g02296673
From the cab, block the blade in flat position on the ground and actuate the angling cylinders to the left in order to place the links in working position.
Insert the pins in order to lock the links and the blade in working position. Refer to Illustration 56 for the correct location of the links.


Parts wheel Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.