WHEEL & TIRE GP 2011882 - Caterpillar

Out-of-balance Loads
In order to prevent rotation of the work tool that is not wanted, the operator must not exceed the rating for an out-of-balance load.
Illustration 13 g01884535
(A) Center of the jaw of the work tool
(B) Object to crush, pulverize, or cut
(M) Moment of torque of the object
(G1) Maximum weight at 2 m (6.5 ft)
(G2) Maximum weight at 4 m (13 ft)
(G3) Maximum weight at 6 m (20 ft)
Table 10
Out-of-balance Load
MP Jaw Moment of torque (M) G1 G2 G3
MP30 PS 1400 N m (1033 lb ft) 70 N m (52 lb ft) 35 N m (26 lb ft) 25 N m (18 lb ft)
MP30 TS 2200 N m (1623 lb ft) 115 N m (85 lb ft) 55 N m (41 lb ft) 35 N m (26 lb ft)
MP20 PP
MP30 PP 2800 N m (2065 lb ft) 140 N m (103 lb ft) 70 N m (52 lb ft) 45 N m (33 lb ft)
MP20 CR
MP20 PS
MP20 CC 3200 N m (2360 lb ft) 160 N m (118 lb ft) 80 N m (59 lb ft) 50 N m (37 lb ft)
MP15 PS
MP15 PP
MP30 S
MP20 S 3600 N m (2655 lb ft) 180 N m (133 lb ft) 90 N m (66 lb ft) 60 N m (44 lb ft)
MP15 CR
MP15 CC
MP20 TS
MP15 S
MP30 CR
MP30 CC 4000 N m (2950 lb ft) 200 N m (148 lb ft) 100 N m (74 lb ft) 70 N m (52 lb ft)
MP40 PS
MP40 CC 8000 N m (5900 lb ft) 400 N m (295 lb ft) 200 N m (148 lb ft) 135 N m (100 lb ft)
MP40 CR
MP40 S Intended Use
The Multi-Processor can accept multiple jaw sets that provide exceptional cutting and crushing force.
The Multi-Processor with Primary Pulverizer Jaws, pulverizes concrete, cuts rebar and separates rebar from concrete.
The Multi-Processor with Secondary Pulverizer Jaws, recycles demolished concrete by pulverizing concrete, separating concrete and rebar, and cutting rebar as needed.
The Multi-Processor with Concrete Cutter Jaws, puts the maximum demolition force precisely where the force is needed, for fast efficient demolition work. The integral steel-cutting knives slice through rebar and pipe.
The Multi-Processor with Crusher Jaws, are for demolition of moderately reinforced concrete structures.
The Multi-Processor with Shear Jaws, demolishes steel structures and reduces steel scrap with high-strength reversible knives.
The Multi-Processor with Tank Shear Jaws, quickly cuts steel plate on barges, railway cars, grain, water, oil, and fuel tanks.