AVSPARE.COM
parts catalog

WHEEL AR- 2389681 - Caterpillar



2389681 WHEEL AR- Caterpillar parts WHEEL
Rating:
51
Alternative (cross code) number:
CA2389681
238-9681
2389681
Caterpillar 2389681 WHEEL AR-

Buy WHEEL AR- 2389681 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Do not exceed the air pressure of 830 35 kPa (120 5 psi) or damage can occur to the air system components.
Connect the steering system to 1U-5000 Auxiliary Power Supply. Refer to Special Instruction, SEHS8715 and Special Instruction, SEHS8880.
Personal injury or death could result when towing a disabled machine incorrectly.Block the machine to prevent movement before releasing the brakes. The machine can roll free if it is not blocked.
Reference: See Operation And Maintenance Manual, "Towing The Machine" for more towing information.Reference: See Testing And Adjusting, "Towing The Machine - Preparation" for the towing procedure.Ensure that the parking brake lever is in the ON position. Push in the knob of the parking brake reset valve.Place the parking brake lever in the cab to the OFF position. Air will enter the parking and secondary brake valve which will cause the control spool to move. This will prevent oil from returning to the hydraulic tank when the electric drive pump for the parking and the secondary brake release is operating. The electric drive pump for the parking and the secondary brake release will be used to supply oil in order to release the parking and secondary brakes. The electric drive pump for the parking and the secondary brake release is operated by a switch that is located in the cab. The hydraulic oil will flow from the pump through the parking and secondary brake valve to the brakes. The oil will be used to release the spring-applied parking brakes.
Illustration 1 g01211974
Towing schematic
(1) Pilot oil for the hoist control valve
(2) Oil flow to the automatic retarder control (ARC) valve
(3) Relief valve
(4) Air flow to the parking and secondary brake valve
(5) Traction control valve (TCS) valve
(6) Check valve
(7) Oil flow to the front brake cooling circuit
(8) Parking and secondary brake valve
(9) Return oil flow back to tank
(10) Oil flow to the rear parking brake
(11) Oil chamber for the front parking brakes
(12) Parking brake release hydraulic filter
(13) Check valve
(14) Parking brake release pump section
(15) Relief valve that is inside the pump
(16) Return oil flow back to tank
(17) Suction screen
(18) Electrical leads to the switch in the cab
(19) Check valve that is inside the pump
(20) Hydraulic tank
(21) Electric powered parking and secondary brake release pump
(22) Electric motor Note: Arrows show oil flow.
Illustration 2 g01202128
Electric drive pump for the parking and the secondary brake release
(21) Electric drive pump for the parking and the secondary brake release
(22) Electric motor
Illustration 3 g01211957
Location of the parking brake lever and the parking brake reset valve
(23) Parking brake reset valve
(24) Parking brake lever
Illustration 4 g00672723
Location of the switch for the electric drive pump for the parking and the secondary brake release


Parts wheel Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.