WHEEL GP-FINAL DRIVE & BRAKE 2465264 - Caterpillar

Removal Procedure
Illustration 1 g00703233
Remove bolt (2) and the washer.
Remove battery cover (1) .
Illustration 2 g00703236
Move rubber battery cover (3) aside.
Illustration 3 g00703239
Loosen nut (5) and disconnect battery cable (4) on the negative terminal of the battery.Note: Do not allow the disconnected battery cable to contact the frame of the machine.
Illustration 4 g00706220
Move rubber battery cover (6) aside.
Illustration 5 g00706224
Loosen nut (7) and disconnect battery cable (8) on the positive terminal of the battery.
Illustration 6 g00706233
Remove two nuts (9) and washers.
Remove bracket (10) from the battery.
Illustration 7 g00706238
Remove battery (11) from the machine.Installation Procedure
Illustration 8 g00706238
Place battery (11) in position.
Illustration 9 g00706233
Install bracket (10) to the battery.
Install washers and two nuts (9) to the bracket. Tighten the nuts.
Illustration 10 g00706224
Connect battery cable (8) onto the positive terminal of the battery and tighten the nut (7) .
Illustration 11 g00706220
Install rubber battery cover (6) onto the battery terminal.Note: Do not allow the disconnected battery cable to contact the frame of the machine.
Illustration 12 g00703239
Connect battery cable (4) onto the negative terminal of the battery and tighten the nut (5) .
Illustration 13 g00703236
Install rubber battery cover (3) onto the battery terminal.
Illustration 14 g00703233
Install battery cover (1) .
Install the washer and bolt (2). Tighten the bolt.