WHEEL & FINAL DRIVE AR 2576305 - Caterpillar

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-8622     Shackle As     2    
B     6V-6146     Load Leveler Gp     1    
Illustration 1 g02848753
Use Tooling (A), Tooling (B), and a suitable lifting device to install engine and torque converter (17). The weight of engine and torque converter (17) is approximately 1724 kg (3800 lb).
Illustration 2 g02848754
Illustration 3 g02848755
Install bolts (16) and bolts (15). Tighten bolts (15) to a torque of 270 40 N m (199 30 lb ft). Repeat this step for the opposite side.
Illustration 4 g02848751
Illustration 5 g02848752
Connect hose (14), hose (13), and install the connecting hardware.
Illustration 6 g02848745
Install tube assembly (12) and tube (11) .
Illustration 7 g02848746
Connect tube assembly (10) .
Illustration 8 g02848748
Connect harness assemblies (9) and hose assembly (8) .
Illustration 9 g02848720
Install tube assembly (7) .
Illustration 10 g02848719
Connect engine harness assemblies (6) and install the connecting hardware.
Illustration 11 g02848718
Connect cable assembly (5) and cable assembly (4). Remove the connecting hardware.
Illustration 12 g02848717
Connect hose assembly (3) .
Illustration 13 g02848716
Connect hose assemblies (2) and hose assemblies (1) .
Turn the battery disconnect switch to the ON position.End By:
Install the radiator guard.
Install the refrigerant dryer.
Install the drive shaft.
Install the implement and steering pump.