WHEEL GP-REAR 2612354 - Caterpillar

Display
The "Display" provides fault codes and fault messages to help troubleshoot sytsem problems. When a fault is detected a message appears on the LCD of the "Display". There are two kinds of faults that appear on the "Display":
Caution - A function has been initiated, but the function cannot be carried out
Warning - A fatal error where something must be repaired or replacedThe "Display" is used in order to view which components are connected to the system. The "Display" is also used to access the "Diagnostic Menu" in order to aid in diagnosing system problems. The following section describes the "Diagnostic Menu" options that are available.Diagnostics
Test Valves
Refer to Systems Operation, Troubleshooting & Testing and Adjusting, "Test Valves Menu".The "Test Valves" menu allows the hydraulic control valves to be driven manually in order to verify correct operation of the display, interface module (valve), and the hydraulic control valve.Hour Meter
Refer to Systems Operation, Troubleshooting & Testing and Adjusting, "Hour Meter Menu".The "Hour Meter" menu shows the length of time that the Display has been operating. The "Hour Meter" menu also shows the length of time the automatic controls have been used with the Display.Software Versions
Refer to Systems Operation, Troubleshooting & Testing and Adjusting, "Software Versions Menu".The "Software Versions" menu identifies which AccuGrade - Laser System components are currently being used. The "Software Versions" menu also shows the versions of software that is loaded in to the AccuGrade - Laser System components.Fault History
Refer to Systems Operation, Troubleshooting & Testing and Adjusting, "Fault History Menu".The Fault History menu shows the AccuGrade - Laser System faults.Note: The last five faults are stored and can be retrieved even if power to the system is lost.Machine Voltage
Refer to Systems Operation, Troubleshooting & Testing and Adjusting, "Machine Voltage Menu".The "Machine Voltage" menu shows the voltage that the system is receiving.Test Control Box
Refer to Systems Operation, Troubleshooting & Testing and Adjusting, "Test Control Box Menu".The "Test Control Box" menu allows you to test the switches that are configured in the Display for proper operation. The "Test Control Box" menu also allows you to test the Display for proper operation. All switches are available for testing except for the "power/setup" switch, the "ESC/Left reset" button, and the "OK/Right Reset" button.