WHEEL ASSEM 2G9059 - Caterpillar

Because of the wear characteristic on the outside faces of the two outside 2V7269 and 9V6165 Plates, they must be installed in exactly the same position as they were before disassembly. Put oil on plates, discs and all seals at assembly.(1) 2V7269, 5V0009 or 9V6165 Plate Thickness: New ... 2.413 0.064 mm (.0950 .0025 in)Minimum worn ... 2.16 mm (.085 in)(2) 2V7268 or 6T7015 or 9W7019 Disc Thickness: New ... 5.08 0.13 mm (.200 .005 in)Minimum worn ... 4.70 mm (.185 in)(3) Torque for bleeder screws ... 24 4 N m (18 3 lb ft)(4) Thickness of eight discs and nine plates (all new) ... 62.36 1.62 mm (2.455 .064 in) To get the minimum thickness, measure the thickness of each plate and disc, then add all of these measurements. When a disc is checked for thickness, measure the depth of each groove in the disc. The depth of a groove must be more than 0.38 mm (.015 in).(5) 8V3609 Spring (later): Quantity ... SixLength under test force ... 86.4 mm (3.40 in)Test force ... 715 N (160 lb)Free length after test ... 107.7 mm (4.24 in)Inside diameter ... 20.4 mm (.80 in)(6) Torque for bolts ... 135 +13 -0 N m (100 +15 -0 lb ft)