WHEEL 2V0051 - Caterpillar

This Program must be administered as soon as possible. When reporting the repair, use "PI3299" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3299" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
This Revised Service Letter replaces the July 11, 1999 Service Letter. Changes have been made to the TERMINATION DATE.
Completion Date
January 31, 2000Termination Date
December 31, 2000Problem
Emissions engines need to be installed in certain 416C Backhoe Loaders shipped to Puerto Rico with non-emissions engines installed. This program pays for the removal and installation of emission engines into these units. This program is for the dealer Rimco Inc. only.
Affected Product
Model & Identification
416C (1WR4084, 4ZN6782, 4ZN6784, 4ZN6786-6787, 4ZN6789, 4ZN7527, 4ZN7531, 4ZN7599, 4ZN7604, 4ZN7607, 4ZN7610, 4ZN7612, 4ZN8767, 4ZN8796, 4ZN8805, 4ZN8809, 4ZN8812, 4ZN8817, 4ZN 8820, 4ZN8824, 4ZN8827, 4ZN8833, 4ZN8836, 4ZN8883, 4ZN8885, 4ZN8889, 4ZN8893, 4ZN8897, 4ZN88974ZN8893, 5YN2683)
Parts Needed
1 - 1228803 Engine Arrangement (replaces 1065001 Engine Ar.)-or-1 - 1228804 Engine Arrangement (replaces 1065002 Engine Ar.)-and-3 - 5P4116 Washer - Conicle3 - 5P4868 Clamp - Hose3 - 8T4121 Washer - Plate3 - 8T4189 Bolt3 - 8T4195 Bolt1 - 1125090 Muffler Assembly1 - 1386900 Elbow - Exhaust1 - 1386901 Bracket Assembly1 - 1386903 Hose - Manifold1 - 1424909 Harness Assembly1 - 1576133 Lock1 - 1576139 Lock Reuse the exhaust stack and the clamping hardware when replacing the muffler.
Action Required
Remove the non-emission engine from the backhoe loader in question and install an emission engine. Because these engines are turbocharged, the muffler, supporting brackets and the engine wiring harness, must also be changed.
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
This is a 20-hour job.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.